ART Logo
SKU 
H81835 000000000

ART ProChannel II Channel Strip   

  • Write a Review

The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean, quiet gain while maintaining incredible transparen...Click To Read More About This Product

In Stock & Ready To Ship

Gold Coverage: (What’s This?)
  • Your Price :
    $2990.00
  Add to Cart
Add to Wish List
Woodwind & Brasswind First Chair Rewards

Earn up to 1,495 (1x) in bonus points today for this item!

Recommended Accessories
OVERVIEW

Affordable, clean sounding channel strip with preamp, compressor, and semi-parametric EQ.

The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean, quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

The ART Pro Channel II's semi-parametric EQ offers wide tune-ability and can be patched before or after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.

FEATURES
  • Variable input impedance for flexible microphone voicing
  • Selectable plate voltage
  • Large VU meters
  • Backlit function switches
  • Discrete class-A input microphone preamplifier
  • Low-noise at lower gain settings
  • Extremely low total harmonic distortion (THD)
  • Wide frequency response
  • Additional front mounted instrument input jack
  • Supports mid/side miking technique
  • Operates at +4dbm/-10dbv output
  • Selectable stereo/dual operation of output controls

Record crisp and clear sounds, at an affordable price.

SPECIFICATIONS

ProChannel II Channel Strip

  • Input Impedance
    Mic: 150 to 3.4K Ohms, variable
    Instrument: 2.5M Ohms
    Preamp Insert: .5K Ohms
    Output Impedance
    Balanced Output: 600 Ohms balanced
    Unbalanced Output: 300 Ohms
    Insert Outputs: 300 Ohms
    Frequency Response
    Analog In to Analog Out: 12Hz to 100kHz +0, -1dB
    THD @ 1kHz: <0.15% typical
    THD @ to to 20kHz: <0.033% typical
    Equivalent Input Noise
    Mic/Line: -128dBu, Input shortened, Max gain, "A" weighted
    Instrument: -109 dBu, Input shortened, Max gain, "A" weighted
    Maximum Input Level
    Mic: +18dBu balanced
    Instrument: +15 dBu
    Maximum Gain
    Mic: 70dB (XLR to balanced output)
    Instrument: 64 dB (1/4" to balanced output
    Maximum Output Level
    Balanced: +24 dBu
    Unbalanced: +20 dBu
    Output Level At Meter 0 VU: +4 dBu/-10dBV
    Preamp
    Microphone Gain: 0 dB to +56 dB
    Instrument Gain: +3 dB to +50 dB
    Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
    EQ
    Boost/Cut: +/- 12 dB on each band
    Low Freq. Tuning: 40 / 120 Hz Selectable
    MID 1 Freq. Tuning: 20 Hz to 2 KHz continuously variable
    MID 2 Freq. Tuning: 200 Hz to 20 KHz continuously variable
    High Freq. Tuning: 6 KHz / 18 KHz Selectable
    Compressor / Limiter
    Attack Time: 250 uSec. to 100 mSec.
    Release Time: 00 mSec to 3 Sec.
    Compression Ratio: 2:1 to 30:1
    Dimensions (WxHxD): 19 x 3-1/2 x 9-3/16"
    Weight: 11 lb
    Power Requirements: USA - 105 to 125 VAC/ 60Hz
    Export units configured for country of destination.
Reviews
Loading....

© 2017 Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.