RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is<br />used). Refer to the frequency supplement supplied with the system.<br />Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)<br />Audio Frequency Response: 25 to 15,000 Hz, ±2 dB<br />NOTE: Overall system frequency response depends on the microphone element.<br /><br />ULX1 Transmitter Output<br />Actual Impedance: 50 Ohms<br />Nominal Output Level: 20 mW<br />Maximum Output Level: 30 mW<br /><br />ULX2 Transmitter Input<br />Input Configuration: Unbalanced, active<br />Actual Impedance: 20 kohms<br />Maximum Input Level: 10 Vpâp (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.<br /><br />ULX2 Transmitter Output<br />Actual Impedance: 50 Ohms<br />Nominal Output Level: 20 mW<br />Maximum Output Level: 30 mW<br />Pin Assignments:
Four independent VHF receivers in one convenient, rugged, all-metal single rack space housing—makes operating 4 wireless systems at the same time easier than ever. Front dual antenna jacks for either onboard or remote antennas. Front panel Power On/Off switch, plus Power On LED, TX ON and AF signal level LED displays. Noise-free transmitter ON/OFF operation. Rear panel individual XLR Output jacks, volume and RF mute controls for each of the 4 channels, and 4-Channels-Mixed AF Out 1/4" phone jack. High performance—transparent audio with 120 dB dynamic range and up to 250+ feet optimum line-of-sight operation. 3 x WHT handheld microphone transmitter, 1 x WLT/WGT headworn microphone bodypack transmitter: can be operated simultaneously on the 4 different channels. WHT—Handheld Microphone Transmitter:. Features the Nady DM-10D unidirectional neodymium dynamic cartridge for optimum turret sound, maximum feedback, rejection and minimal handling noise. Off/Stand