330W/ch @ 2 ohms, 300W/ch @ 4 ohms, 200W/ch @ 8 ohms, 660W bridged mono @ 4 ohms, 600W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and choice of 1/4", XLR, and barrier strip jacks; all in a rugged steel chassis designed to handle serious road use. |
Standard Features
| | |
| Signal-to-Noise Ratio | > 98 dB |
| Level | Two front-panel rotary level controls, one for each channel. |
| AC Line Voltage and Frequency Configurations | 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC |
| XLS 402 | 4-ohm Stereo (per channel): 450W; 8-ohm Stereo (per channel): 300W; 8-ohm Bridge-Mono: 900W |
| XLS 602 | 4-ohm Stereo (per channel): 600W; 8-ohm Stereo (per channel): 380W; 8-ohm Bridge-Mono: 1,200W |
| XLS 802 | 4-ohm Stereo (per channel): 800W; 8-ohm Stereo (per channel): 500W; 8-ohm Bridge-Mono: 1,600W |
| Power | Front-panel switch; on when in the IN position. |
| XLS 202 | 4-ohm Stereo (per channel): 300W; 8-ohm Stereo (per channel): 200W; 8-ohm Bridge-Mono: 600W |
| Load Impedance | Rated for 4 to 8 ohms per channel in Stereo, 8 ohms in Bridge Mono. |
| Sensitivity | 1.25 V |
| IMD | from full rated output to û40 dB: < 0.3% |
| THD | < 0.5% |
| Frequency Response | +0 dB, û0.8 dB |
| Input Impedance (nominal) | nominal): 20 kilohms balanced, 10 kilohms unbalanced. |
|
|