dbx 223xs Stereo 2-Way/Mono 3-Way Crossover
true
true
- Write a Review
With the dbx 223xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in bui...Click To Read More About This Product
-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodH72800&isStyle=true"
}
- SKU
- H72800000000000 H72800000000000
Earn up to 1,295 reward points.
Great performance, ultra low-noise, and rugged reliability.
With the dbx 223xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
- INPUTS
- Connectors: XLR (pin 2 hot)
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced >50k ohm, unbalanced >25k ohm
- Max Input Level: >+22dBu balanced or unbalanced
- OUTPUTS
- Connectors: XLR
- Type: Electronically-balanced/unbalanced, RF filtered
- Impedance: Balanced 60 ohm, unbalanced 30 ohm
- Max Output Level: >+20dBu balanced/unbalanced into 600 ohms or greater
- CROSSOVER FREQUENCIES
- Stereo Mode: Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Mono Mode: Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
- Filter type: Linkwitz-Riley, 24 dB/octave, state-variable
- FUNCTION SWITCHES
- Front Panel (Low Cut): Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel
- Phase Invert: Inverts the phase at the output, one switch per output
- Rear Panel: x10: Multiplies the crossover frequency range by 10, one switch per channel
- Mode: Selects stereo/mono and 2/3-way operation.
- LF sum: Selects normal (stereo) or mono-summed low frequency operation.
- INDICATORS
- Stereo Operation: Green LED
- Mono Operation: Yellow LED
- Low Cut: Red LED per channel
- x10 Green LED per channel
- Phase Invert: Red LED per output (3 per channel)
- SYSTEM PERFORMANCE
- Bandwidth: 20Hz to 20kHz, +0/-0.5dB
- Frequency Response: < 3Hz to > 90kHz, +0/-3 dB
- Dynamic Range: >106dB, unweighted, any output
- THD + Noise: <0.004% at +4dBu, 1kHz
<0.04% at +20dBu, 1 kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
CMRR: >40dB, typically >55dB at 1kHz - Signal-to-Noise (Ref: +4dBu, 22kHz measurement bandwidth)
- Stereo Mode >94dB (Low Output); >91dB (High Output)
- Mono Mode: >94dB (Low Output); >93dB (Mid Output); >91dB (High Output)
- POWER SUPPLY
- Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50/60HZ
- Power consumption: 15W
- Operating Temperature: 32F to 113F (0C to 45C)
- PHYSICAL
- Dimensions: 1.75" H X 6.9" D X 19" W (4.5cm x 17.5cm x 48.26cm )
- Weight: 3.7 lbs. (1.7 kg)
