Our Price: $22.99
Sale: $21.99 (4% off)
See this Deal
Mark III Bass Clarinet Ligature and Cap
Remaining Quantity: 45
*Additional discounts do not apply
Price valid on in stock items only.
Print the following sections:
Protect your investment with aPlatinum Coverage warranty plan:
There are no products for the condition you selected. Please make another selection.
This instrument or product has been carefully played/used and returned to us in
virtually new condition, however its packaging may not meet the standards set by
the factory. Also, it no longer carries the manufacturer's warranty. If you're looking
for a virtually new instrument in possibly less-than-perfect packaging, this is
a great value. We feel so strongly you'll like what you see, we're including our
60-Day Satisfaction Guarantee on instruments and 30 days on accessories, to this used product making it a no-risk purchase.
Very Good: This instrument or product has been carefully played/used and shows few,
minor signs of use. In most respects it looks and performs like new and may be considered
equivalent to display units found in retail stores. Its packaging may not meet the
standards set by the factory and it no longer carries the manufacturer's warranty.
Condition 2 products are a terrific value and you can buy with confidence knowing
our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories applies to this used product.
This instrument or product is in good working condition but has one or more cosmetic
flaws beyond those of a Condition 2 product. These flaws are typical of an instrument
or product that's seen normal wear and tear, including incidental scratches, chips,
dings, dents or other imperfections. It performs just as well as a Condition 1 or
Condition 2 instrument/product. Its packaging may not meet the standards set by
the factory and it no longer carries the manufacturer's warranty. Condition 3 is
a great choice if you're looking for performance and value and not as concerned
with cosmetics. You can buy with confidence knowing our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories
applies to this used product.
This instrument or product is not in working condition and needs repair, but can
be brought back to full functionality with replacement of parts or some skilled
repair work. If you are a do-it-yourselfer or know a skilled repair person this
is a terrific value. Condition 4 products are sold AS-IS: they do not come with
a manufacturer's warranty and are not returnable.
This instrument or product has been damaged beyond what we judge is reasonably repairable.
It's best used for spare parts or to practice repairs on, and at this price Condition
5 products are sold AS-IS: they do not come with a manufacturer's warranty and are
Accidental damage, normal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Drawmer DL251 Spectral CompressorThe Drawmer DL251 Spectral Compressor, incorporates a variable 'Dynamic Spectral Enhancement' (D.S.E.) section which eliminates the problems associated with full band compressors by restoring the high frequency energy lost during the full band compression process. This enhancement circuitry is extremely effective where compression and limiting are employed for broadcast transmission, or across complete mixes in a stereo mixdown situation. Dynamic Spectral Enhancement has many creative applications when recording individual components at the multi-track stage, particularly on acoustic guitar, piano, brass and vocals. Facilities available on the DL251 include: Compressor. The compressor section can be switched to provide either HARD or SOFT knee compression In both the HARD and SOFT modes a Ratio control is available In the SOFT mode the ratio increases gradually over a 10dB 386input level range until it reaches the ratio set on the front panel control, thus achieving a more natural sounding compression. Selectable manual or automatic Attack and Release times dramatically extend the application range and user scope of the DL251. Selecting the 'Auto' mode removes the need for manual adjustment and is particularly valuable when the program being treated does not have predictable or consistent dynamics, such as on complete mixes, vocals or 'slapped and pulled' bass guitar. Under manual control the wide range of adjustment available gives the user the ability to create dynamic effects as well as normal compression. Enhance Level. A variable Enhance control can be used to 'dynamically' boost any high frequency energy lost during the full band compression process and has sufficient range to add additional 'Spectral Energy' to the programmed material for creative processing. When no compression is taking place, the 'Dynamic Spectral Enhancement' circuitry is inoperative and so no change is made to the signal. However, as the signal level rises to the point where gain reduction is taking place, the Enhancement system 'kicks in' applying dynamic boost which is directly related to the amount of gain reduction taking place. A front panel switch offers an instant A/B comparison of this feature and a green LED indicates the amount of enhancement taking place. Metering. Comprehensive bar graph displays give 'at a glance' indications of gain reduction, and input/output signal level Gain reduction from 1 dB to -30dB is shown simultaneously with signal level from 20dB to + 15dB Other single LEDs indicate function status of Hard/ Soft compression, Auto Attack/ Release, Side chain monitoring, Bypass, Enhancement, Peak Limiting, Stereo Linking and Power on. Side Chain Listen. A front panel push button with LED status enables the monitoring of any external processing applied to the side chain access connections on the rear panel. Bypass. A fully balanced hard wire bypass connects the input directly to the output allowing signal to pass through the unit with no power applied. In bypass mode the output level bar graph displays the Input signal. Stereo Link. When processing stereo signals, linking should be used to prevent image shifting. This facility ties both channels together. Using channel 1 (Left) as the master channel removes the need to duplicate control settings for both channels. A rear panel switch allows the selection of 'Peak' or 'Average' stereo signal detection. Peak Level. 'Zero Response Time', 'Zero Overshoot' circuitry provides an absolute limit to the peak level of the output signal, adjustable from 0dB to +16dB above system level When set to the required level, any excessive peaks will be stopped and the gain momentarily decreased if necessary The 'Zero Response Time' is essential to avoid unpleasant distortion when mastering for CD or sending any signal to digital equipment. 'Zero Response Time' means that the DL251 provides complete protection from even the fastest and shortest signal 'spikes' (overloads), making the unit also ideally suited for speaker system protection in sound reinforcement applications. Operating Level. The operating level of the DL251 can be instantly switched, independently on each channel, for either +4dBu or -10dBu operation using a rear panel push switch. Input/Output. The DL251 is provided with balanced inputs and outputs on XLR connections.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items. You will be contacted via email shortly after submission of request.