Eminence Logo
660088 000000000

Eminence Legend 1058 10 In Guitar Speaker   

  • Write a Review

The Eminence Legend 1058 10" Guitar Speaker has a very meaty tone, but with sparkle, definition and a smooth top-end. This Eminence Legend speaker is...Click To Read More About This Product

In Stock & Ready To Ship

  • Your Price :
  Add to Cart
Add to Wish List
Woodwind & Brasswind First Chair Rewards

Earn up to 300 (1x) in bonus points today for this item!

Recommended Accessories

The Eminence Legend 1058 10" Guitar Speaker has a very meaty tone, but with sparkle, definition and a smooth top-end. This Eminence Legend speaker is great for blues, country and rock. High power, vintage, seamed cone tonality for guitar. It's an ideal Vintage alnico Jensen replacement speaker.

  • Voice Coil Diameter: 1.5", 38.1mm
  • Magnet Weight: 16 oz.
  • Power Rating.: 75W

Put this Eminence speaker in the cart.


Legend 1058 10 In Guitar Speaker

  • Nominal Basket Diameter: 10", 254mm
    Nominal Impedance: 8 ohms
    Power Rating*: 75W
    Resonance: 97Hz
    Usable Frequency Range: 100Hz-6kHz
    Sensitivity**: 98.7
    Magnet Weight: 16 oz.

    Thiele & Small Parameters
    Resonant Frequency (fs): 97Hz
    DC Resistance (Re): 7.49
    Coil Inductance (Le): 0.56mH
    Mechanical Q (Qms): 17.78
    Electromagnetic Q (Qes): 1.21
    Total Q (Qts): 1.13
    Compliance Equivalent Volume (Vas): 26.4 liters / 0.9 cu. ft.
    Peak Diaphragm Displacement Volume (Vd): 0cc
    Mechanical Compliance of Suspension (Cms): 0.16mm/N
    BL Product (BL): 8.0 T-M
    Diaphragm Mass inc. Airload (Mms): 17 grams
    Efficiency Bandwidth Product (EBP): 80
    Maximum Linear Excursion (Xmax): 0.0mm
    Surface Area of Cone (Sd): 344.9 cm2

    Mounting Information
    Recommended Enclosure Volume:
    Sealed: Acceptable
    Vented: Acceptable
    Overall Diameter: 10.11", 256.8mm
    Baffle Hole Diameter: 9.13", 231.8mm
    Front Sealing Gasket: fitted as standard
    Rear Sealing Gasket: fitted as standard
    Mounting Holes Diameter: 0.23", 5.7mm
    Mounting Holes B.C.D.: 9.6", 243.8mm
    Depth: 4.1", 104mm
    Net Weight: 4.4 lbs., 2 kg
    Shipping Weight: 5.4 lbs., 2.5 kg

    Materials of Construction
    Copper voice coil
    Polyimide former
    Ferrite magnet
    Non-vented core
    Pressed steel basket
    Paper Cone
    Paper cone edge
    Solid composition felt dust cap

    * Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
    **The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
    Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
    fiberglass on all six surfaces (three with custom-made wedges)

© 2017 Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.