Skip to main content Skip to footer

  • Print
  1. Home
  2. Accessories
  3. Amplifier Parts
  4. Speakers for Instrument Amps
Eminence Logo
Product 660063

Eminence Lil' Buddy 10" 50W Guitar Speaker

The Eminence Lil Buddy 10" 50-watt replacement speaker has clean and full tone. The Lil' Buddy is slow to break-up, but crunchy when driven. Smoothe...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.

Customers Also Viewed:
OVERVIEW

The sound of hemp!

The Eminence Lil Buddy 10" 50-watt replacement speaker has clean and full tone. The Lil' Buddy is slow to break-up, but crunchy when driven. Smoother and less defined than many 10" guitar speakers, this lightweight American-made guitar speaker has a hemp cone and is great for jazz and blues.


SPECIFICATIONS
  • SPECIFICATIONS
  • Nominal Basket Diameter: 10", 254mm
  • Nominal Impedance*: 8 ohms
  • Power Rating: Watts 50W
  • Music Program
  • Resonance: 149Hz
  • Usable Frequency Range: 80Hz-5kHz
  • Sensitivity***: 99.1
  • Magnet Weight: 30 oz.
  • Gap Height: 0.312", 7.92mm
  • Voice Coil Diameter: 1.75", 44.5mm
  • THIELE & SMALL PARAMETERS
  • Resonant Frequency (fs): 149Hz
  • DC Resistance (Re): 6.31
  • Coil Inductance (Le): 0.46mH
  • Mechanical Q (Qms): 9.06
  • Electromagnetic Q (Qes): 0.93
  • Total Q (Qts): 0.84
  • Compliance Equivalent Volume (Vas): 10 liters / 0.35 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd): 29cc
  • Mechanical Compliance of Suspension (Cms): 0.05mm/N
  • BL Product (BL): 11.7 T-M
  • Diaphram Mass inc. Airload (Mms): 22 grams
  • Efficiency Bandwidth Product (EBP): 160
  • Maximum Linear Excursion (Xmax): 0.8mm
  • Surface Area of Cone (Sd): 366.1 cm2
  • MOUNTING INFORMATION
  • Recommended Enclosure: Sealed (Vented Acceptable)
  • Overall Diameter: 10.11", 256.8mm
  • Baffle Hole Diameter: 9.13", 231.8mm
  • Front Sealing Gasket: fitted as standard
  • Rear Sealing Gasket: fitted as standard
  • Mounting Holes Diameter: 0.23", 5.7mm
  • Mounting Holes B.C. D.: 9.60", 243.8mm
  • Depth: 4.3", 109mm
  • Net Weight: 6.3 lbs., 2.9 kg
  • Shipping Weight: 7.4 lbs., 3.4 kg
  • MATERIALS OF CONSTRUCTION
  • Coil Construction: Copper voice coil
  • Coil Former: Paper former
  • Magnet Composition: Ferrite magnet
  • Core Details: Non-vented core
  • Basket Materials: Pressed steel basket
  • Cone Composition: Hemp Cone
  • Cone Edge Composition: Paper cone edge
  • Dustcap Composition: Zurette dust cap
  • *Please inquire about alternative impedances.
  • **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
  • ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
  • Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
  • calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
  • fiberglass on all six surfaces (three with custom-made wedges).

This oversized item has special shipping requirements

Restrictions

See All Eminence Speakers for Instrument Amps
Customer Service

Sign up for the latest deals!

Click for the BBB Business Review

2024© Woodwind & Brasswind. All rights reserved.      Do Not Sell or Share My Information | Data Rights Request | Cookie Preferences | Terms & Conditions | Privacy Policy | Accessibility Statement

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.