Eminence Logo
SKU 
660064 000000612

Eminence Lil' Texas 12" 125W Guitar Speaker   8 Ohm

  • Write a Review

The Eminence Lil' Texas 12" Guitar Speaker is a lightweight 12" speaker with a little Texas edge. Lil' Texas delivers a very balanced tone with cris...Read More

In Stock & Ready To Ship

  • Your Price :
    $10999.00
  Add to Cart
Add to Wish List
Woodwind & Brasswind First Chair Rewards

Earn up to 550 (1x) in bonus points today for this item!

Recommended Accessories

The Eminence Lil' Texas 12" Guitar Speaker is a lightweight 12" speaker with a little Texas edge. Lil' Texas delivers a very balanced tone with crisp mids and top end bite, tight bottom end, and very American tonality. Great for classic rock, blues, and country.

Eminence recommends the Lil" Texas speaker as an alternate replacement for the Eminence Tonkerlite speaker in the Rocktron Velocity S1122 and the THD Ported 2 x 12 cabinets.

FEATURES

Put this replacement speaker in the cart.

SPECIFICATIONS

Lil' Texas 12" 125W Guitar Speaker

  • Nominal Basket Diameter: 12", 304.8mm
    Nominal Impedance*: 8 ohms
    Power Rating**: 125W
    Resonance: 90Hz
    Usable Frequency Range: 70Hz-5.5kHz
    Sensitivity***: 101
    Magnet Weight: 4 oz.
    Gap Height: 0.28", 7.2mm
    Voice Coil Diameter: 2", 50.8mm

    Thiele & Small Parameters
    Resonant Frequency (fs): 90Hz
    DC Resistance (Re): 7.2
    Coil Inductance (Le): 0.42mH
    Mechanical Q (Qms): 11.29
    Electromagnetic Q (Qes): 0.69
    Total Q (Qts): 0.65
    Compliance Equivalent Volume (Vas): 43 liters / 1.53 cu. ft.
    Peak Diaphragm Displacement Volume (Vd): 66cc
    Mechanical Compliance of Suspension (Cms): 0.11mm/N
    BL Product (BL): 12.8 T-M
    Diaphragm Mass inc. Airload (Mms): 28 grams
    Efficiency Bandwidth Product (EBP): 130
    Maximum Linear Excursion (Xmax): 1.3mm

    Mounting Information
    Recommended Enclosure Volume:
    Sealed: Acceptable
    Vented: Acceptable
    Overall Diameter: 12.03", 305.5mm
    Baffle Hole Diameter: 10.95", 278.1mm
    Front Sealing Gasket: fitted as standard
    Rear Sealing Gasket: fitted as standard
    Mounting Holes Diameter: 0.25", 6.4mm
    Mounting Holes B.C.D.: 11.59", 294.3mm
    Depth: 5.07", 129mm
    Net Weight: 4.1 lbs., 1.9 kg
    Shipping Weight: 5.8 lbs., 2.6 kg

    Materials of Construction
    Copper voice coil
    Polyimide former
    Neodymium magnet
    Non-vented core
    Pressed steel basket
    Paper Cone
    Paper cone edge
    Zurette dust cap

    *Please inquire about alternative impedances.
    **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
    ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms.
    Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software
    calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with
    fiberglass on all six surfaces (three with custom-made wedges)
Reviews
Loading....

© 2016 Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.