• Print
Fender Logo
Product 502267

Fender Vibro-King Custom 60W 3x10 Tube Guitar Combo Amp   

  • Write a Review

The venerable Fender Vibro-King amp has appeared on countless stages worldwide. This all-tube, completely hand-wired combo amp with birch ply cabinet...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.

Customers Also Viewed:
Recommended Accessories
OVERVIEW

Say hello to an industry standard.

The venerable Fender Vibro-King amp has appeared on countless stages worldwide. This all-tube, completely hand-wired combo amp with birch ply cabinet is covered in black with the appealing "1964 Transitional" Blackface/White knob look. The 60-watt Vibro-King Custom has a pair of powerful 6L6 Groove Tubes for rich, full tone and its sensitivity is unparalleled when it comes to picking dynamics and guitar knob settings. The guitar amp has crystal-clean tones, sparkling reverb, and the commanding overdriven tones are downright inspiring.

Other premium features include '63 Fender Reverb with dwell, mix and tone controls; three 10" Jensen P10R speakers with alnico magnets; 6V6 reverb driver tube; five 12AX7 preamp tubes; heavy-duty textured black vinyl covering with silver grille cloth and nickel hardware; FX loop; and a two-button FAT boost/vibrato footswitch.

FEATURES
  • Premium birch cabinet construction
  • Completely all-tube; hand-wired circuit
  • Includes USA-made GT-6L6 GE output tubes
  • Pre-gain '63-style Fender reverb with dwell, mix, and tone”go from mellow to intense "crashing" reverb tone
SPECIFICATIONS

Vibro-King Custom 60W 3x10 Tube Guitar Combo Amp

  • Type: CSR 4
  • Part numbers: 0811000000 (120v, 60Hz)
  • Power requirement: 195 Watts
  • Power output: 60 Watts
  • Impedances input 1: 1 mOhms input 2: 136 kOhms
  • Impedances output: 2 ohms
  • Tubes: five 12AX7A (p/n 013341) two GT”6L6 GE (p/n 059778) one 6V6-GTA (p/n 023564)
  • Fuse type 100v-120v units: 3a, 250v 230v-240v units: 2.5a, 250v
  • Speaker complement: three 8 ohm, 10" Jensen reissue P10R
  • Speakers (p/n 055613), total impedance 2.6 ohms
  • Dimensions height: 25.5"H x 24.75"W 10.5"D
Reviews
Loading....

Review Snapshot

by PowerReviews
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

The Best of the Best

By 

from In.

Site Member

The Vibro King Custom is an all tube hand point to point wired amp with unbelievable tone. Three 10 inch speakers pump out 60 watts of incredible sound. Crank it up and listen as it beomes more and more overdriven. Lower the volume to about 3 and that is where the sweetspot seems to begin for playing very clean and very loud. Picking dynamics are amazing as you can hear a detailed fat scratchiness as you dig in and play hard. I've never heard another amp quite like this one. Its a wonderful amp for blues, rock, or country. For heavier styles a pedal will be necessary. This is the same amp used by Pete Townsend, Cheryl Crow and others. Keep in mind it is not a bedroom amp. It was born to be played on a stage. Great amp to play in a big room. Filling the room with sound is what this amp does. Expensive, but worth the investment.

Displaying review 1

Back to top

© Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.