Our Price: $11.31
Sale: $11.99 (-6% off)
See this Deal
Taylor Swift For Easy Guitar Tab
Remaining Quantity: 7
*Additional discounts do not apply
Price valid on in stock items only.
Print the following sections:
Protect your investment with aPlatinum Coverage warranty plan:
There are no products for the condition you selected. Please make another selection.
This instrument or product has been carefully played/used and returned to us in
virtually new condition, however its packaging may not meet the standards set by
the factory. Also, it no longer carries the manufacturer's warranty. If you're looking
for a virtually new instrument in possibly less-than-perfect packaging, this is
a great value. We feel so strongly you'll like what you see, we're including our
60-Day Satisfaction Guarantee on instruments and 30 days on accessories, to this used product making it a no-risk purchase.
Very Good: This instrument or product has been carefully played/used and shows few,
minor signs of use. In most respects it looks and performs like new and may be considered
equivalent to display units found in retail stores. Its packaging may not meet the
standards set by the factory and it no longer carries the manufacturer's warranty.
Condition 2 products are a terrific value and you can buy with confidence knowing
our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories applies to this used product.
This instrument or product is in good working condition but has one or more cosmetic
flaws beyond those of a Condition 2 product. These flaws are typical of an instrument
or product that's seen normal wear and tear, including incidental scratches, chips,
dings, dents or other imperfections. It performs just as well as a Condition 1 or
Condition 2 instrument/product. Its packaging may not meet the standards set by
the factory and it no longer carries the manufacturer's warranty. Condition 3 is
a great choice if you're looking for performance and value and not as concerned
with cosmetics. You can buy with confidence knowing our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories
applies to this used product.
This instrument or product is not in working condition and needs repair, but can
be brought back to full functionality with replacement of parts or some skilled
repair work. If you are a do-it-yourselfer or know a skilled repair person this
is a terrific value. Condition 4 products are sold AS-IS: they do not come with
a manufacturer's warranty and are not returnable.
This instrument or product has been damaged beyond what we judge is reasonably repairable.
It's best used for spare parts or to practice repairs on, and at this price Condition
5 products are sold AS-IS: they do not come with a manufacturer's warranty and are
Accidental damage, normal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Hercules Stands DS420B TravLite In-Bell Trombone StandThe DS420B TravLite In-Bell Trombone Stand offers a sturdy stand that folds up to be stored in the bell of the trombone. The DS420B features a velvet base cone to protect the interior of the bell plus 4 folding legs for extra stability.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
Have used it on my Blessing 88HO tenor open wrap F attachment, and my p-Bone, and my Yamaha Xeno YSL 830L Bass Trombone.
Works fine on tenor and pBone, not so good with my Yamaha Bass. The vertical support shaft slips in it's locking clamp, and I have found the slide bumper tip on the floor several times in the morning, meaning the clamp had fallen about two inches. Clamp is not heavy duty enough for a big heavy, professional Bass Trombone.
This thing worked great for a while, then the pinch lever that holds the top cup to the vertical pole started to slip, banging my King 3B slide on the bumper on the end crook. Now this is NOT a heavy horn, and this should never have happend.
It also happed with my Bach 42BO w/F attach., which is a much heavier horn.
Finally it has even fallen with my little .484 slide bore Conn 18H. It only fits in a few bells in the case, and makes the front end of your case weigh a ton when you carry it.
By far the worst stand I have used; and it was fairly expensive. TWO THUMBS DOWN!!!!!!
I bought this stand when I needed somewhere to put my trombone during the long resting periods that occur frequently when playing in a pit orchestra. I found that the stand supported my tenor trombone just fine. Putting the stand together was no trouble either, once I got the hang of it. When I switched instruments to a Bach Stradivarius and a Conn 88h, the stand still held my instruments true and true.
However, right off the bat, the main neck of the stand seemed pretty rusty and hard to pull out when setting up the stand. This has gotten worse and worse over the two years that I have had the stand. There's still nothing wrong with the way the stand holds my trombones, but I'm worried about what the rust might lead to the malfunctioning of my stand, endangering the safety of my instruments.
Customer service was incredible! They stand behind their product 100%. It was an unusual event, but they exchanged my broken stand for a new one, with my only expense being the shipping back to them. I'll be more careful with this one, don't use for anything less than .500 bore size.
This is a well-engineered stand that is sturdy enough to support my heavy, double-rotor 1968 Conn 62H bass trombone. Once you figure out how to "unfold" the stand, it's a snap to set up and tear down (the included instructions, however, are a bit ambiguous). The neatest feature of the stand is that it's designed to fit in the bell of your trombone while transporting it inside your case or gig bag. The problem, however, is that it won't actually fit some cases. With my bass trombone, there was too much room between the bottom of the stand and the wall of the case, allowing the stand to bounce around inside the trombone bell -- not cool! Fortunately, I solved that problem by inserting a 5" x 6" x 1" piece of "spongy" foam between the end of the stand and the wall of the case to prevent the stand from moving during transport -- problem solved! However, when I tried to use the stand with my early 1970's King 3B tenor trombone, the opposite occurred. With the stand firmly inserted in the bell, there still wasn't enough room to get the horn's bell section to fit inside what is actually a cavernous coffin-case! (A friend has the same problem with this stand not fitting in his form-fitting trombone case.) In my case, the block that holds the trombone's main brace is fastened to a compartment cover with two screws. Although I haven't done it, yet, I plan to simply drill two new holes and reposition the holding block so that both the bell section and inserted stand will fit inside the case. I'm also a bit skeptical about how well the stand will work in a soft-sided gig bag. If you're able to sufficiently secure the stand to prevent it from bouncing around inside the trombone bell, then I think you'll be okay.
* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items. You will be contacted via email shortly after submission of request.