-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prod484293&isStyle=true"
}
- Product 484293
Kustom PA KPC15P / UB1202 PA Package
false
false
The Behringer UB1202 / KPC15P Mains & Monitors Package contains:¢ 1 EURORACK UB1202 mixer¢ 2 Kustom KPC15P 15" powered PA speakers¢ 2 Nady StarPo...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.
Customers Also Viewed:
An affordable small club PA system!
The Behringer UB1202 / KPC15P Mains & Monitors Package contains:
¢ 1 EURORACK UB1202 mixer
¢ 2 Kustom KPC15P 15" powered PA speakers
¢ 2 Nady StarPower 1 microphones
¢ 2 20-foot XLR cables (2 for mics and 2 for speakers)
¢ 2 speaker cables with 1/4 jacks
¢ 2 Musician's Gear All-Steel Tripod Speaker Stands
Behringer EURORACK UB1202 Mixer
The Behringer EURORACK UB1202 is a 12-input, 2-bus mic/line mixer that boasts 4 state-of-the-art Invisible Mic Preamps (IMPs). You even get an effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels. There is also one post-fader aux send per channel for external effects devices; main mix outputs; plus separate control room, headphone, and stereo tape outputs. Tape inputs are assignable to main mix or control room/phones outputs. The Behringer UB1202 is an extremely versatile mixer with possibilities ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.
Kustom KPC15P Powered PA speaker
The Kustom KPC15P is a 100-watt, powered speaker with a 15" Kustom-built loudspeaker and a piezo HF driver. This PA speaker is tuned to deliver rich, balanced tonality while accurately reproducing a wide variety of audio content.
The Kustom KPC15P powered speaker provides balanced XLR and TRS 1/4" (balanced/unbalanced) input jacks. These may be used to connect a wide variety of line level devices such as non-powered mixers, preamps, keyboards, drum machines and other audio devices including music players such as iPods and CD players. The Kustom KPC15P speaker's volume control adjusts the overall level.
A TRS 1/4" line out jack may be used to daisy chain 2 or more Kustom KPC speakers for a wider dispersion of sound. For example, if a non-powered audio mixer has been connected to the Kustom KPC speaker's input, the line out of this first speaker may be connected to a second speaker's Input. This is a daisy chain and it often requires shorter cable hook-up lengths versus connecting the second speaker directly to the audio mixer.
Nady StarPower SP-1 Microphone
The all-purpose Nady StarPower 1 Microphone makes a great stage and recording mic. The StarPower 1 delivers clear, transparent sound across the audio spectrum. The StarPower mic's rugged construction and internal shockmounting yield reliability and low handling noise. The Nady microphone's powerful neodymium element cuts through with minimum distortion, even at high sound pressure-levels. If you're looking for real value in a microphone, the Nady StarPower 1 brings a stage-load of it.
- Ultralow-noise design, highest possible headroom, ultra-transparent audio
- 4 state-of-the-art, studio-grade Invisible Mic Preamps with:
- 130dB dynamic range for 24-bit, 192kHz sampling rate inputs
- Ultrawide 60dB gain range
- Lowest possible distortion - 0.0007% (20Hz-20kHz)
- Effective, extremely musical 3-band EQ and low-cut filter on mono channels
- 12 balanced high-headroom line inputs with +4/-10 level selection on stereo channels
- State-of-the-art 4580 op amps for lowest noise and distortion
- One post-fader aux send per channel
- Peak LEDs on all mono channels
- Main mix outputs plus separate control room, headphone, and stereo tape outputs
- Tape inputs assignable to main mix or control room/headphone outputs
- Effects-to-control room function to monitor effect signal via headphones and control room outputs
- Switchable +48V phantom power for condenser microphones
- Long-wearing 60mm logarithmic-taper ALPS master fader and sealed rotary controls
- External power supply for noise-free audio and superior transient response
- Extremely rugged steel construction ensures long life even under the most demanding conditions
- Manufactured under ISO9000 certified management system
- One 100-watt, Class AB, built-in power amplifier with current-limited protection circuitry
- One 15", Kustom PA Speaker
- One piezo horn with wide dispersion flare
- One balanced XLR Input jack
- One TRS 1/4" Input jack
- Volume control
- One TRS 1/4" Line Out jack
- Built-in polemount socket
- All-purpose professional stage and recording microphone
- Excellent clear, transparent sound across the spectrum with smooth bass, mid-presence punch, and crisp highs
- Unidirectional cardioid pattern with superior feedback rejection
- Rugged metal construction and internal shock mounting for maximum reliability and ultra-low handling noise
- Powerful neodymium element cuts through with accurate, distortion-free sound in even the highest sound pressure level situations
- Mic clip included
- Please see linked PDF manual
- RMS output: 100W
- Speaker: 15" Special Design
- Horn: Piezo Driver
- Input: XLR Balanced / 1/4" Balanced, Unbalanced
- Line out: 1/4" Balanced, Unbalanced
- Frequency Response: 60Hz-20Khz
- Input Sensitivity: 1VRMS
- Sensitivity: 97dB 1W/1M
- Crossover frequency: N/A
- Dimensions: 19"W x 24"H x 14-5/16"D
- Dimensions (mm): 483W x 610H x 363D
- Weight: 50 lb.; 22.5kg (each)
- Cartridge type magnet: Dynamic, neodynium cartridge
- Directivity pattern: Unidirectional cardioid
- Frequency response: 80-12,000Hz
- Sensitivity: (@1KHz, 74dB SPL): -73dB, ±3dB
- Impedance: 500ÃŽ (Lo-Z)
- Maximum SPL: >130dB
- Dimensions: 2.2" x 7" (56 x 178mm)
- Weight: 7.65oz (214g)
- Material (Handle) die-cast - Zinc)
- Ballscreen: Metal mesh
