The missing link for bringing your computer-based music, games, and DVDs to life.
M-Audio Studiophile monitors are used by top recording engineers and producers in studios around the world. Now you can enjoy the same professional standard of audio quality right on your desktop!For a Limited Time - free Hosa CMR203 3.5mm - dual RCA Cable with purchase!
Get great sound on your desktop; order now!
Detailed Product Description
DX4 Studio Monitors
The Studiophile DX4s match custom tuned cabinet design, optimized drivers and advanced crossover technology with plenty of power to insure the highest-fidelity sound available from audio monitors of their size. M-Audio's proprietary OptImage wave guide technology also assures improved stereo imaging. The Studiophile DX4s are the missing link for bringing your computer-based music, games and DVDs to life.
Detailed Product Features
- Brings high-fidelity to desktop monitoring
- Perfect for desktop music, games, and DVDs
- 4" low-frequency drivers
- 1" high-frequency drivers
- Advanced crossover design
- OptImage wave guide technology improves imaging
- Front-panel volume control
- 1/8" stereo headphone jack
- Mid-cut switch optimizes tuning
- 18W per channel
- Custom-tuned cabinet
Detailed Product Specifications
- dynamic range : >95dB
- SPL : 101.5dB
- signal-to-noise ratio : >90dB (typical, A-weighted)
- input connectors : 1/4" TRS, RCA
- attenuation : mid-cut switch
- crossover frequency : 2.8kHz
- dynamic power : 18 watts/channel
- dynamic range : >95dB
- HF driver : 1" mylar cone with OptImage dispersion-controlled wave guide
- input connectors : 1/4" TRS, RCA
- input impedance : 20K Ohms balanced, 10K Ohms unbalanced
- LF driver : 4" coated paper cone
- signal-to-noise ratio : >90dB (typical, A-weighted)
- SPL : 101.5dB
- attenuation : mid-cut switch
- dynamic power : 18 watts/channel
- input impedance : 20K Ohms balanced, 10K Ohms unbalanced
- LF driver : 4" coated paper cone
- crossover frequency : 2.8kHz
- HF driver : 1" mylar cone with OptImage dispersion-controlled wave guide
- HF driver: 1" mylar cone with OptImage dispersion-controlled wave guide
- LF driver: 4" coated paper cone
- Dynamic power: 18W/channel
- Dynamic range: >95dB
- Crossover frequency: 2.8kHz
- Signal-to-noise ratio: >90dB (typical, A-weighted)
- SPL: 101.5dB
- Input impedance: 20K Ohms balanced, 10K Ohms unbalanced
- Input connectors: 1/4" TRS, RCA
- Attenuation: mid-cut switch
- Weight: 12 lbs.