Nady Logo
SKU 
H77408 000000000

Nady MHT-16 Horn Wireless System   

  • Write a Review

The Nady MHT-16 Horn Wireless System includes the MGT-16 receiver and the MH-16 Saxophone (Horn) Instrument TransmitterThe Nady MH-16 is a miniature,...Read More

Available 12-15-2016

Gold Coverage: (What’s This?)
  • Your Price :
    $19724.00
  Reserve Now Notify Me When This is in Stock
Add to Wish List
Woodwind & Brasswind First Chair Rewards

Earn up to 985 (1x) in bonus points today for this item!

Recommended Accessories
OVERVIEW

Gives horn players freedom of movement.

The Nady MHT-16 Horn Wireless System includes the MGT-16 receiver and the MH-16 Saxophone (Horn) Instrument Transmitter

The Nady MH-16 is a miniature, lightweight transmitter that clips directly onto bell of horn. No cord connection needed. A protective rubberized clamp-on device easily locks transmitter firmly to horn. A flexible gooseneck allows optimum microphone positioning. Transmitter features a high-performance microphone with tight cardioid polar pattern and wide frequency response to suppress unwanted feedback.

The Nady MGT-16 is a compact receiver can be placed anywhere you choose. It is powered by internal AA batteries or AC adapter (supplied). Has 16 user-selectable UHF frequencies for interference-free operation. ASC (Auto-Sync Channel) infrared wireless download pairs transmitter to selected receiver frequency for quick, easy setup. It has a 250 ft. line-of-sight operating range, and is powered by single AAA battery.

FEATURES
  • MGT-16 Instrument Receiver
  • Compact, portable, "pedal style" receiver can be placed anywhere
  • Dual ¼ wave antennas
  • Unbalanced ¼" line output plug
  • Power On/Off/Mute switch; Volume Control; LED indicators for Low Battery, and RF Reception; DIP-switch channel selection with IR sync to transmitter; IR Sync LED
  • Powered by DC adapter (included) or two AA alkaline batteries for
  • portability (Up to 8 hours battery life)
  • MH-16 Saxophone (Horn) Instrument Transmitter
  • Clip-on-the-horn barrel style without any tangling wires
  • Up to eight hours of battery life from a single AAA alkaline or NiMH rechargeable battery
  • Infrared channel sync with receiver for instant setup
  • Power On/Off switch; Power/Low Battery LED indicators; IR Sync LED
  • Input level attenuation switch; internal audio level control trim-pot
  • External flexible wire antenna

Take your performances to the next level.

SPECIFICATIONS

MHT-16 Horn Wireless System

  • GENERAL
    Frequency Response: 50Hz-16kHz (-3dB)
    Dynamic Range: 120dB
    Oscillating System: Phase Lock Loop (PLL)
    Total Harmonic Distortion (THD): <0.8%
    RF Carrier Frequency Range: 902.40MHz-923.70MHz
    Modulation: FM (F3E), +/-30KHz normal
    Operating Range: Up to 250 feet (typical, depending on site conditions)

    MGT-16 Receiver
    Controls: Audio Level, Power ON/MUTE/OFF, Frequency Select DIP-switches, IR sync button
    Connectors: Unbalanced ¼", DC Adapter input jack
    LED Indicators: Power ON (Red-continuous), Low Power (Amber-continuous),RX
    reception (Green), IR Sync LED
    Antennas: Dual ¼ wave, adjustable orientation
    Signal-to-Noise Ratio: > 105dB (w/AC/DC power supply)
    Receiver Sensitivity: -110dBm nominal, 12dB SINAD
    Squelch Sensitivity: -95dBm (minimum/normal setting), adjustable
    Output Impedance: 1.0KÎ
    Power Consumption: DC: 3V/ 115mA or AC/DC adapter: 15VDC/200mA
    Battery: Two AA alkaline or NiMH
    Battery Life: Up to 8 hours
    Dimensions: 2.75" W x 5.00" D x 1.88" H (7.0 cm x 12.7 cm x 4.78 cm)
    Weight: (w/o batteries) 5.7 oz (161.6 g)
    Housing Construction: ABS Plastic

    MH-16 Saxophone (Horn) Instrument Transmitter
    RF Power Out: 25mW nominal, 50mW maximum
    Harmonic & spurious emissions: -50dB
    Controls: Power ON/OFF, 15dB Attenuation Pad select switch
    LED Indicators: Power ON (Red-single flash), Low Battery (Red flashing)
    Input Impedance: 500KÎ
    Power Consumption: DC 1.5V/90mA
    Battery: One AAA alkaline or NiMH
    Battery life: Up to 8 hours
    Antenna: ¼ wave, permanently attached
    Dimensions: 8.5" W x 2.25" D x 1.0" H (21.6 cm x 5. 8 cm x 2.54 cm)
    Weight (w/o batteries): 2.1 oz (59.6 g)
    Housing Construction: ABS Plastic
Reviews
Loading....

© 2016 Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.