Nady Logo

Nady PM-200A Powered Personal Stage Monitor   

  • Write a Review

The compact, rugged, and lightweight Nady PM-200A Powered Personal Stage Monitor can be mounted on a mic stand (with optional adapter), set on a keyb...Click To Read More About This Product

In Stock & Ready To Ship

Gold Coverage: (What’s This?)

  • Shipping (48 Contigous U.S. States)
  • Your Price :
  Add to Cart
Add to Wish List

Earn up to 775 reward points.

Recommended Accessories

In-your-face onstage monitoring.

The compact, rugged, and lightweight Nady PM-200A Powered Personal Stage Monitor can be mounted on a mic stand (with optional adapter), set on a keyboard, amp, or table for effective up-close monitoring, or as a stage monitor with 4 different angled positions for optimum placement and versatility. The monitor is designed to reduce stage clutter and volume by putting the sound where you can most use it. The PM-200A features headphone outputs, line outputs, and external speaker outputs. The PM-200A stage monitor is also extremely versatile and can be configured in a number of ways to suit your special needs.

The PM-200A Powered Personal Stage Monitor is the perfect tool for monitoring audio on stage or in rehearsal. This unit puts the controls at your fingertips so you'll never have to scream for "More Monitors!" again. The Nady PM-200A is tailor-made to reduce feedback while allowing vocals and instruments to stand out in the mix. Simply input a line level feed from the main or monitor mixer and adjust the EQs and Volume to your personal liking. Or you can input your instrument/vocal signal directly, before outputting to the main PA, to hear yourself solo. You'll hear yourself loud and clear and never miss the bridge again with the PM-200A monitor by your side!

  • Powerful internal 150W RMS amp
  • Specially designed dual ferro-fluid 5" drivers
  • Powers internal speakers plus up to 4 PM-100 Personal Stage Monitors
  • 2 external speaker outputs
  • 125dB maximum SPL cuts through loudest mixes
  • Balanced 1/4" TRS and XLR input jacks
  • Volume control
  • 3-band EQ controls Clipping LED indicators
  • High-powered headphone output
  • 1/4" balanced line output for daisy chaining with other PM-200A, or connecting to mixers and PAs
  • Works with most standard 5/8" microphone stands

Order today and hear yourself loud and clear.


PM-200A Powered Personal Stage Monitor

  • Mic Input: balanced XLR
    Input Impedance: 2K
    Maximum Input: -10.2dBm (235mV)
    Sensitivity (for max output w/Volume max): -40dBm (7.5mV)

    Line Input: balanced/unbalanced TRS 1/4"
    Input Impedance: 20K ohms (10K ohms unbalanced)
    Maximum Input: +22dBm (10V)
    Sensitivity (for max output w/Volume max): -10dBm (230mV)

    Line Output: balanced XLR
    Output Impedance: 1.4kOhm
    Maximum Output (w/10K load): 15.5dBm (4.3V)

    EQ and Volume: rotary knobs
    High: +/-12dB @ 10K Hz
    Mid: +/-12dB @ 2.5K Hz
    Bass: +/-12dB @ 120 Hz
    Headphone Output: 1/4" TRS Stereo
    Power: 2 x 80mW @ 32 ohms

    Power Amp Output: 2 internal speakers, 2 external 1/4" outputs
    Power: 2 x 50W RMS @ 8 ohms (Total 100W RMS)
    2 x 75W RMS @ 4 ohms (Total 150W RMS)
    Frequency Response: 20Hz ” 50KHz
    THD: 0.055%
    S/N: -81dB
    Noise Floor: 200uV
    Amplifier protection: clipping LED's, thermal runaway, short circuit, anti-thump on/off protection

    Internal Speakers: 5" full-range
    Impedance: 8 ohms
    Voice Coil diameter: 1"
    Power Requirements: Selectable, 115VAC/60Hz or 230VAC/50Hz
    Fuse Requirements: 5x20mm glass tube F.B. 6A 250V @ 115VAC
    3A 250V @ 230VAC
    Weight: 9.6 lbs. (4.4 Kg)
    Dimensions (HWD): 11.1" x 7" x 6.1" (28 x 18 x 15.5 cm)

© Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.