Simmons Logo
SKU 
490556 000000000

Simmons DA200S Electronic Drum Set Monitor   

  • Write a Review

The Simmons DA200S houses a 100-watt low-frequency amp with two 50-watt mid- and high-frequency amps. The low-frequency amp powers a heavy-duty 12" d...Read More

In Stock & Ready To Ship

Gold Coverage: (What’s This?)
  • Your Price :
    $34999.00
  Add to Cart
Add to Wish List
Woodwind & Brasswind First Chair Rewards

Earn up to 1,750 (1x) in bonus points today for this item!

Recommended Accessories
OVERVIEW

Delivers the volume you need.

The Simmons DA200S houses a 100-watt low-frequency amp with two 50-watt mid- and high-frequency amps. The low-frequency amp powers a heavy-duty 12" down-firing sub-woofer speaker and a specially designed slot port for bottom-end projection. Left and right mid- and high-frequency amps drive 2-6-1/2" mid-range speakers and 2-1/2" high-frequency tweeters.

The DA200S maintains the integrity of the stereo drum signal from input to speakers (including line outs and extension speaker jacks). This provides a broad stereo field that positions your drums at their correct sonic locations, providing a realistic audio experience for you and your audience, whether you're in the studio or playing live.

FEATURES
  • General features
  • Soft touch knobs (adjustable with your drum stick)
  • Ribbed handle for easy transport
  • Protective, long-lasting carpet covering
  • High-frequency tweeters for cymbal clarity
  • Heavy-duty midrange speakers for punchy mid-frequency response
  • Heavy-Duty 12" Down-firing sub-woofer for enhanced bass response (internal)
  • Heavyweight steel grille
  • Slot-port for enhanced cabinet with efficiency and bottom-end projection
  • Front panel features
  • Drum Inputs: 1/4" input jacks (left and right)
  • Aux Input: 1/4" stereo jack used for connecting any pre-EQ source such as a click track, additional digital instruments, devices, drum pad MPC machines, etc.
  • Drum Volume to control the volume level of the Drum Inputs to the power amplifier
  • Aux Volume to control the volume level of the Aux Input
  • Equalization section with low, mid, and high knobs to control the overall tone
  • Sub controls the volume of the low frequency sub-woofer
  • Master: This controls the overall volume of the amplifier
  • Line In: 1/8" stereo line input which bypasses the EQ tone controls and feeds straight into the power amplifier, perfect for using CD or MP3 players to play along with
  • Headphone Jack: 1/8" stereo output jack which combines all inputs from your drums, Aux Input, and Line In for monitoring your drums during live performances
  • Back panel features:
  • Left and Right Line Outs: balanced XLR Line Outs provide quiet, noise-free signal flow through a standard mic cable or snake to a recording or live console
  • Volume Control for Line Outs: completely independent from the Master volume on the front panel, allowing you to set your feed level to a mixing console
  • Ground Lift: to eliminate hum or buzz that may exist if there is a ground loop created between any stage gear and the PA system
SPECIFICATIONS

DA200S Electronic Drum Set Monitor

  • Output power (RMS 1%)
    50 Watts @ 8 Ohms (x2) Tweeter Internal Speakers (Stereo)
    50 Watts @ 4 Ohms (x2) Midrange Internal Speakers (Stereo)
    100 Watts @ 8 Ohms (x1) Subwoofer Internal Speaker (Mono)
    500 mWatts @ 32 Ohms (x2) output to Headphones (Stereo)

    Frequency Response: 20 Hz - 20 kHz, tailored for accurate acoustic response for electronic drums
    Hum and Noise: -60 dBV with all controls turned down, -55 dBV with all controls turned halfway
    Input Impedance: 10K Ohms through all inputs

    Input Levels
    -16 dBV Drum Inputs to achieve full output
    - 20 dBV Aux to achieve full output
    -10 dBV Line In to achieve full output

    External Outputs
    Max external speaker output: 30 Watts (x2) extension speaker jacks are wired in series with internal midrange speakers.
    XLR-Balanced line outputs adjustable from off (CCW) to 0 dBV (CW). Wiring follows IEC268 standard (pin1 shield, 2 +, and 3 ”).
    (All measurements made at 1 kHz, EQ controls flat and volumes Max.)

    Tone controls (EQ centers): 50 Hz, 800 Hz, 10 kHz, 3 band, +/”12 dB

    AC power requirements: 400 watts at full output, 14 watts at idle

    Speakers
    12" (305 mm) woofer special design, 8 Ohms rated 150 Watts RMS
    2 x 6.5" (165 mm) midrange special design, 4 Ohms rated 65 Watts RMS
    2 x 2.5" (64 mm) tweeter special design, 8 Ohms bullet horn rated 50 Watts RMS

    Dimensions (English) 16 1/2" deep, 17 3/4" wide, 20" tall, including feet (420 cm Deep, 450 cm Wide, 508 cm Tall)
    Weight: 57 lbs./25.8 kg
Reviews
Loading....

© 2016 Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.