-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodH79524&isStyle=true"
}
- Product H79524
Tascam DR-100 MKII Portable Digital Recorder
false
false
The rugged TASCAM DR-100 offers high-end recording features to musicians and engineers who demand more from their portable recorder. It features four...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.
Customers Also Viewed:
Extremely handy, high-end digital recorder that will always be within reach in the field.
The rugged TASCAM DR-100 offers high-end recording features to musicians and engineers who demand more from their portable recorder. It features four built-in microphones, two cardioid and two omnidirectional, with analog limiting and filtering that will have you producing great-sounding recordings no matter where you are. A pair of XLR microphone inputs with phantom power welcomes pro-grade condenser microphones, and line in and out connectors are also provided.
The DR-100 includes a rechargeable Lithium-ion battery, but can also be powered by AA batteries or an optional AC adapter. A built-in speaker allows for instant playback, and the metal enclosure includes a tripod-mounting hole for recording flexibility. A wireless remote control is also included for remotely starting the recording, as well as a windscreen and carrying case.
- Four built-in microphones - 2 stereo cardioid and 2 omni condenser Mics
- 44.1k to 96k sampling rates for WAV file recording
- XLR Mic Inputs with phantom power and high-performance microphone preamp with 60dB of gain, so you can add your own mic for recording
- Premium AKM Audio4Pro A/D converters with over 100dB signal to noise ratio
- 3.5mm Line Inputs and Outputs
- Low Cut Filter, Analog Limiter and Auto Gain Control
- Built-in Speaker to monitor recordings in the field
- Integrated microphone stand mount that allows you to operate the unit hands free
- Runs on Rechargeable Li-Ion Battery or AA Batteries
You can have precision digital recording in the palm of your hand, with the DR-100 MKII from Tascam.
- Connectors: XLR-3-32equivalent (balanced)
- Input impedance: 1.2k-ohms
- GAIN HIGH setting
- Standard input level: -58 dBu
- Maximum input level: -42 dBu
- GAIN MID setting
- Standard input level: -36 dBu
- Maximum input level: -20 dBu
- GAIN LOW setting
- Standard input level: -14 dBu
- Maximum input level: +2 dBu
- Connector: 3.5 mm stereo minijack
- Input impedance: 23k-ohms
- Standard input level: -10dBV
- Maximum input level: +6dBV
- Connector: 3.5 mm stereo minijack
- Standard output level: -10dBV
- Maximum output level: +6dBV
- Connector: 3.5 mm stereo minijack
- Maximum output: 25mW + 25mW (with 32 ? headphone connection)
- Built-in speaker output: 0.4 W
- Frequency response (LINE IN > LINE OUT): 20Hz-20kHz, +1/-3dB (44.1kHz) 20Hz-22kHz, +1/-3dB (48kHz)
- Distortion (LINE IN > LINE OUT): Less than 0.01%
- S/N ratio (LINE IN > LINE OUT): 90dB or more
- MP3 files: 32-320 kbps, sampling frequency 44.1/48kHz, VBR playback, ID3 tag support up to Ver 2.4
- WAV files: sampling frequency 44.1/48kHz, bit length: 16/24-bit
- Recording media: SD cards (64 MB-2 GB) and SDHC cards (4 GB-32 GB)
- File system: FAT partition: FAT16/32
- Lithium ion battery (BP-L2): About 5 hours (recording time) / About 5 hours (playback time)
- Ni-MH batteries (HR15/51): About 4 hours (recording time) / About 4 hours (playback time)
- Alkaline batteries (LR6): About 2 hours (recording time) / About 2 hours (playback time)
- (Backlight off, set to 128-kbps mp3. Varies according to use conditions.)
- Operation temperature range: 0-40 deg. C
- Power consumption:
- 1.7W (MP3 playback)
- 5.5W (maximum)
- External dimensions (WxHxD): 3-1/8" x 6" x 1-3/8"
- Weight: 290 g (not including batteries)
- Pentium 300 MHz or better
- 128 MB or more memory
- USB port (USB 2.0 recommended)
- 266 MHz Power PC, iMac, G3, G4 or better
- 64MB or more memory USB port (USB 2.0 recommended)
- Recommended USB host controller: Intel chipset
- Windows: Windows 2000 Professional SP4 or newer, Windows XP, Windows Vista
- Macintosh: Mac OS X 10.2 or newer
