Our Price: $15.99
Sale: $10.50 (34% off)
See this Deal
Advantage Series 1/4" Angled - Straight Instrument Cable
Remaining Quantity: 237
*Additional discounts do not apply
Price valid on in stock items only.
Print the following sections:
Protect your investment with aPlatinum Coverage warranty plan:
There are no products for the condition you selected. Please make another selection.
This instrument or product has been carefully played/used and returned to us in
virtually new condition, however its packaging may not meet the standards set by
the factory. Also, it no longer carries the manufacturer's warranty. If you're looking
for a virtually new instrument in possibly less-than-perfect packaging, this is
a great value. We feel so strongly you'll like what you see, we're including our
60-Day Satisfaction Guarantee on instruments and 30 days on accessories, to this used product making it a no-risk purchase.
Very Good: This instrument or product has been carefully played/used and shows few,
minor signs of use. In most respects it looks and performs like new and may be considered
equivalent to display units found in retail stores. Its packaging may not meet the
standards set by the factory and it no longer carries the manufacturer's warranty.
Condition 2 products are a terrific value and you can buy with confidence knowing
our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories applies to this used product.
This instrument or product is in good working condition but has one or more cosmetic
flaws beyond those of a Condition 2 product. These flaws are typical of an instrument
or product that's seen normal wear and tear, including incidental scratches, chips,
dings, dents or other imperfections. It performs just as well as a Condition 1 or
Condition 2 instrument/product. Its packaging may not meet the standards set by
the factory and it no longer carries the manufacturer's warranty. Condition 3 is
a great choice if you're looking for performance and value and not as concerned
with cosmetics. You can buy with confidence knowing our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories
applies to this used product.
This instrument or product is not in working condition and needs repair, but can
be brought back to full functionality with replacement of parts or some skilled
repair work. If you are a do-it-yourselfer or know a skilled repair person this
is a terrific value. Condition 4 products are sold AS-IS: they do not come with
a manufacturer's warranty and are not returnable.
This instrument or product has been damaged beyond what we judge is reasonably repairable.
It's best used for spare parts or to practice repairs on, and at this price Condition
5 products are sold AS-IS: they do not come with a manufacturer's warranty and are
Accidental damage, normal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Tube-Tech CL 2A Dual CompressorIf one channel of Tube-Tech compression isn't enough for you, here's the Tube-Tech CL 2A Dual Compressor, which features two independent optical compressors--it's like having two CL 1Bs, giving you the added advantage of stereo compression for keyboards, drum overheads, bass (mic + DI), stereo bus, and multi-mic recording. Of course, just like the CL 1B, it absolutely shines on vocals. Once you have Tube-Tech compression in your signal path, you'll wonder how you ever recorded without it. Tube-Tech CL 2A Dual Compressor, First Take:All-tube amplified optocompressor with non-degrading gain reduction elementTwo link busses allow up to ten CL 2As can be linked togetherBalanced I/O and floating transformers All-Tube Amplified OptocompressorThe rack mount Tube-Tech CL 2A compressor is a dual optocompressor with the optical gain reduction element placed after the input transformer and then followed by an all tube-based output amplifier with a +10 dB gain. Therefore, the signal is not fed through any semiconductor circuitry on its way to the output, which contributes to the signal clarity of the CL 2B. Additionally, The optical gain unit does not experience any degradation over the long term, providing nearly infinite life. The amplifier is based on two tubes (dual triodes) in push-pull configuration (one ECC 83 as a differential amplifier, and one ECC 82 as the output stage), and an output transformer. The power supply for the differential amplifiers is stabilized and the heaters of all four tubes are fed with a stabilized DC voltage. Stereo and Multi Link ModeA switch with three positions (Link 1, Off, Link 2) is used whenever you want to use the two separate compressors in stereo mode or link several compressors together. The two link busses are identical. Sidechain sockets for interconnection of several compressors are located on the rear panel. A switch on the front selects which compressors are interconnected, and on which bus they are connected. If you e.g. have 10 compressors in a rack, you can select compressor 1,5,7 and 8 on link 1, and compressor 2,3,6 and 9 on link 2, leaving compressor 4 and 6 in the off position. Compressors 1,5,7,8 would now be interconnected and all four will perform the same compression. This applies to compressor 2,3,6 and 9 as well. Compressor 4 and 6 are independent. The interconnection implies that the unit that performs the most compression is controlling the others. Additionally, you can choose which one you want to control the others. Balanced I/O and Floating TransformersMicrophone Input/Output are balanced and have fully floating transformers with a static screen. Floating a transformer (not referencing it to ground) provides maximum electronic isolation for superior noise rejection. The static screens shield the transformer's secondary windings from the primary and prevent RF (radio frequency) electromagnetic noise from getting across. The power supply and the sidechain circuits are based on a solid-state circuit. With the exception of the anode in the output stage all DC voltages are stabilized. This prevents any variation in the DC energy when combined with the musical signal, which would otherwise cause certain types of distortion or hum.About Tube-TechFor over twenty years, Tube Tech has been one of the most prominent names in all-tube signal processing equipment. You'll find their gear in the best recording and mastering studios around the world. The company's founder, John Petersen is an electrical engineer who was factory trained at Solid State Logic, EMT, Studer, Sony, Neumann, and NTP Electonik (digital audio routers). He also designed tape recorder playback/recording amps for Lyrec tape recorders (found in the studios of the legendary Joe Meek and Vangelis). His first design under the name of Tube-Tech was an all-tube equalizer based on the legendary Pultec EQP 1A. Petersen continued to design and manufacture a number of innovative all-tube outboard processors including preamps, multiband compressors and summing amps. Thanks to John's dedication to high-quality analog sound you'll see Tube-Tech gear in the racks of pro audio legends such as multi Grammy Award winner Al Schmitt, (Frank Sinatra, Steely Dan, Toto, Quincy Jones, Natalie Cole, Diana Krall), Grammy winner Joe Chiccarelli, (Elton John, Beck, U2, Tori Amos, Counting Crows, Offspring), engineer Russ Long (Sixpence None The Richer, Wilco, Dolly Parton, Allison Moorer), producer-engineer Tony Shepperd (Elton John, Madonna, Kenny Loggins, Barbra Streisand, Lionel Richie, and Whitney Houston), and many more.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items. You will be contacted via email shortly after submission of request.