Our Price: $12.99
Sale: $10.98 (15% off)
See this Deal
Harry Potter Instrumental Solos for Trumpet - Book/CD
Remaining Quantity: 4
*Additional discounts do not apply
Price valid on in stock items only.
Print the following sections:
Protect your investment with aPlatinum Coverage warranty plan:
There are no products for the condition you selected. Please make another selection.
This instrument or product has been carefully played/used and returned to us in
virtually new condition, however its packaging may not meet the standards set by
the factory. Also, it no longer carries the manufacturer's warranty. If you're looking
for a virtually new instrument in possibly less-than-perfect packaging, this is
a great value. We feel so strongly you'll like what you see, we're including our
60-Day Satisfaction Guarantee on instruments and 30 days on accessories, to this used product making it a no-risk purchase.
Very Good: This instrument or product has been carefully played/used and shows few,
minor signs of use. In most respects it looks and performs like new and may be considered
equivalent to display units found in retail stores. Its packaging may not meet the
standards set by the factory and it no longer carries the manufacturer's warranty.
Condition 2 products are a terrific value and you can buy with confidence knowing
our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories applies to this used product.
This instrument or product is in good working condition but has one or more cosmetic
flaws beyond those of a Condition 2 product. These flaws are typical of an instrument
or product that's seen normal wear and tear, including incidental scratches, chips,
dings, dents or other imperfections. It performs just as well as a Condition 1 or
Condition 2 instrument/product. Its packaging may not meet the standards set by
the factory and it no longer carries the manufacturer's warranty. Condition 3 is
a great choice if you're looking for performance and value and not as concerned
with cosmetics. You can buy with confidence knowing our 60-Day Satisfaction Guarantee on instruments and 30 days on accessories
applies to this used product.
This instrument or product is not in working condition and needs repair, but can
be brought back to full functionality with replacement of parts or some skilled
repair work. If you are a do-it-yourselfer or know a skilled repair person this
is a terrific value. Condition 4 products are sold AS-IS: they do not come with
a manufacturer's warranty and are not returnable.
This instrument or product has been damaged beyond what we judge is reasonably repairable.
It's best used for spare parts or to practice repairs on, and at this price Condition
5 products are sold AS-IS: they do not come with a manufacturer's warranty and are
Accidental damage, normal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Tube-Tech ME 1B Midrange EqualizerLooking for midrange punch as only tubes can deliver? Look no farther than the Tube-Tech ME 1B Midrange Equalizer. Based on the example of the legendary Pultec MEQ-5 from the days of yore, Tube-Tech has dedicated a modern EQ to this all-too-important region of the audio spectrum, and does it with all-tube style and warmth. It provides the kind of performance you expect from a high-end EQ, and does it effortlessly. With Tube-Tech EQ, you get dramatic results without having to tweak endlessly. To get the most out of the ME 1B, use it to focus on midrange while another EQ, such as the EQ 1A handles the lows and highs. And while it would be tempting to use it to make individual instruments larger than life, adding punch and sheen to an overall mix is where this EQ shines. Tube-Tech ME 1A Midrange Equalizer, First Take:Midrange program equalizer with passive filters and tube-based gain-makeup amplifierThree sections of selectable EQBalanced and fully floating I/OPassive EQ with Tube AmplifierThe rackmount Tube-Tech ME 1B Midrange Equalizer contains a low frequency boost section for peaking, a mid frequency attenuation for dipping, and a high frequency boost section for peaking. The ME 1B contains a passive filter and a tube-based amplifier to restore the loss from the filter. The filter has a low frequency peak section with 5 selectable frequencies, a mid frequency dip section with 11 selectable frequencies, and a high frequency peak section with 5 selectable frequencies. The filter is placed directly after the input transformer, therefore eliminating noise from the amplifier when boosting either low- or high frequencies. The amplifier consists of two tubes in push-pull configuration (one ECC 83 as the pre-amp, and one ECC 82 as the output stage), and an output transformer. Both input and output are balanced (600_) and fully floating for maximum electronic isolation. The in/out key switches the equalization in and out without clicks and changes in level, while the amplifier remains in the signal path.Three Frequency SectionsUsing a bell curve EQ to isolate center frequencies, the ME 1B divides the midrange into three sections, low, mid, and high. The low frequency section comprises a continuously variable peak control (0dB to +10dB) and choice of five selectable frequencies (200Hz, 300Hz, 500Hz, 700Hz, 1kHz). TheMid Frequency section comprises a Dip control that is continuously variable from 0dB to -10dB and eleven selectable center frequencies from 200Hz to 7kHz. The High Frequency section covers five selectable frequencies from 1.5kHz to 5kHz and a Peak control that is continuously variable from 0dB to +8dB.Balanced and Fully Floating I/OBoth input and output are balanced (600 ohm) and fully floating, which provides maximum electronic isolation since there is no common ground between input and output. Input and output transformers come with a static screen between the primary and secondary wirings. These screens shield the secondary from the primary and prevent RF (radio frequency) electromagnetic noise from getting across.About Tube-TechFor over twenty years, Tube Tech has been one of the most prominent names in all-tube signal processing equipment. You'll find their gear in the best recording and mastering studios around the world. The company's founder, John Petersen is an electrical engineer who was factory trained at Solid State Logic, EMT, Studer, Sony, Neumann, and NTP Electonik (digital audio routers). He also designed tape recorder playback/recording amps for Lyrec tape recorders (found in the studios of the legendary Joe Meek and Vangelis). His first design under the name of Tube-Tech was an all-tube equalizer based on the legendary Pultec EQP 1A. Petersen continued to design and manufacture a number of innovative all-tube outboard processors including preamps, multiband compressors and summing amps. Thanks to John's dedication to high-quality analog sound you'll see Tube-Tech gear in the racks of pro audio legends such as multi Grammy Award winner Al Schmitt, (Frank Sinatra, Steely Dan, Toto, Quincy Jones, Natalie Cole, Diana Krall), Grammy winner Joe Chiccarelli, (Elton John, Beck, U2, Tori Amos, Counting Crows, Offspring), engineer Russ Long (Sixpence None The Richer, Wilco, Dolly Parton, Allison Moorer), producer-engineer Tony Shepperd (Elton John, Madonna, Kenny Loggins, Barbra Streisand, Lionel Richie, and Whitney Houston), and many more.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
* Price guarantee valid on all new in-stock merchandise sold by an authorized U.S. Dealer. Guarantee does not apply to discontinued, blemished, damaged, closeout, open box, refurbished or auction items. You will be contacted via email shortly after submission of request.