Skip to main content Skip to footer

  • Print
Allen & Heath Logo
Product 634041

Allen & Heath PA 12-CP Powered Mixer

  • Write a Review

Allen & Heath PA 12-CP Mono inputs8 mono channels with Mic [XLR] & Line [TRS] inputs. Line input overrides the XLR input. Individual +48V phantom pow...Click To Read More About This Product

We're sorry-this item is unavailable.

Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.

Customers Also Viewed:
Recommended Accessories

An impressive value on a feature-rich PA mixer.

Allen & Heath PA 12-CP
Mono inputs
8 mono channels with Mic [XLR] & Line [TRS] inputs. Line input overrides the XLR input. Individual +48V phantom power switches are provided. New padless two-stage preamp with smooth gain law. Line input goes to second stage for better matching and performance. Switched 100Hz high pass filter. Insert point. 4 band EQ. 4 aux mixes. Mute with LED. PFL button with LED [functions as peak indicator]. 100mm fader.4 Band EQ
Shelving LF [60Hz], and HF [12kHz]. Fixed LM [250Hz], and swept HM [300Hz - 6kHz]. The fixed 250Hz control has been carefully selected to provide reduction of 'muddy' sounds and enhance 'warmth'Dual Stereo Channels
Two stereo channels with two unbalanced stereo inputs on each. One is RCA one is TRS jack. Independent gain controls provide source mixing in the channel strip. The top inputs [RCA] can be switched direct to L&R instead of the channel strip providing extra returns. Two band shelving EQ. 4 aux mixes. Stereo balance, mute with LED, PFL with LED, and 100mm fader as mono channels.4 Auxiliary Sends
From all channels: 2 pre-fade for foldback mixes - these have 100mm fader masters, mute switch with LED, AFL with LED, and TRS outputs [can be routed internally to output section]. 1 post-fade aux mix for FX - this feeds the internal FX and has a TRS jack output for external FX. 1 post-fade aux mix to TRS jack output is provided for external FX or special feeds.Mix Outputs
Main stereo mix output has 100mm fader control & mute with LED. TRS jack outputs. Mono sum output with level control with switch for subwoofer mode to TRS jack. Record output [RCA] analogue + SPDIF switchable pre/post fader. Twin 12 segment LED bar meter shows program [or PFL /AFL]. Insert points on TRS jack for external processing. Output EQ and routing to internal amplifiers / external systems is provided.Output EQ
4 band semi-parametric EQ is provided in the output section, this affects the TRS slave outputs, and the internal constant power amplifiers. This offers more control than graphic equalisers for precise management of speakers, especially foldback / monitors. Source selector allows output EQ section to be used on Left / right, L&R sum / foldback1, or foldback1 / foldback2.Constant Power Amplifiers
1kW i.e. 2 x 500W RMS peak power professional class AB power amplifiers built in. Unique ALLEN&HEATH design gives full output into 4 OR 8 ohms [rear switch selector]. Output is to locking Speakon(TM) connectors. Thermal management twin fan system. Full protection - input limiter to prevent clipping, short circuit protection, current limit and DC fault sensing. LED indication of: signal presence, peak warning, speaker protect and temperature. AB amp input TRS break-jacks [normalised to output section / slave out jacks] allow independent use of the power amplifiers if desired. Standby mode switch puts amplifier into protect with speakers isolated.Digital FX
16 program digital FX processor provides reverbs, delays, chorus and others, inc combined. This FX module takes its feed from the post-fade FX aux on the mono & stereo channels. The output of the FX module is controlled by a 100mm fader with mute & PFL and is routed to the stereo mix and FB1&2 with post fade level controls. At this point, 2 TRS inputs with level control provide a way of combining external FX with the internal unit. Internal FX unit can be switched off to use external only if preferred. A footswitch TRS jack is provided to mute the FX channel. Editing of FX can be done via MIDI using ALLEN&HEATH software editor.Master Section
Background music BGM mode - plays 2 track input into the main mix post fader, allows user to pull down fader (whilst patching, taking a break, or during walk-in) and leave music playing through the amplifiers / speakers. 2 track input [RCA] with level control to L&R - feeds headphone monitor selector [checking recording]. Twin, 3 colour 12 segment LED meter displays active monitor source. Large LED indicates PFL / AFL active - signal overrides L&R / 2TRK monitor source selection. Standby switch uses relays to disconnect the speakers. 2 track output [RCA] analogue + SPDIF allows direct to digital recording. Switchable pre / post master L&R fader. Mono sum out with level [TRS] - mode switch to provide sub feed with 100Hz low pass filter. Phones out [TRS] with level.

  • 8 mono channels with mic (XLR) and line (TRS) inputs
  • Line input overrides the XLR input
  • 2X500W RMS peak power professional class, fan-cooled, circuit-protected AB power amplifiers
  • Individual +48V phantom power switches are provided
  • New padless 2-stage preamp with smooth gain law Line input goes to second stage for better matching and performance
  • Switched 100Hz high pass filter
  • Insert point
  • 4-band semi-parametric EQ
  • 4 aux mixes
  • Mute with LED
  • PFL button with LED that functions as peak indicator
  • 100mm fader
  • 16-program digital FX processor
  • 0dBu = 0.775 Volts rms 0dBV = 1 Volt rms
  • Maximum output level: TRS +21dBu into 2kOhm load
  • Nominal output level: L-R +0dBu into 600 ohm max load; Other o/p's +0dBu into 2kOhm max load
  • Internal headroom: Mix to o/p +21dB. Channels+21dB
  • Peak LEDs: 5dB before clipping
  • Noise: measured rms 22Hz to 22kHz. Mic EIN ref 150 ohm source -128dB. L-Rresidual <-89dBu (nothing routed). L-R mix <-85dBu (channels routed)
    Frequency response: 20Hz to 30kHz +/- 0.5dB
  • THD: +10dbu, 1kHz
  • Channel to mix o/p <0.006%
    Crosstalk:: - 1kHz, Ch to ch <-90dB, Chl mute shutoff<-95dB, Ch fader shutoff <-95dB
    Power Amp: Outputpower Constant Power switchable. = 2 x 500w RMS into 4 ohm. = 2 x 500wRMS into 8 ohm. Frequency response THD+N <0.02%@1kHz
    MainsPower: Internal unit, linear regulated Internally wired to requiredcountry voltage
  • AC mains input 100V to 240V AC@50/60Hz
  • Powerconsumption 1600W max
  • Mains fuse rating
  • 100-120V AC use T10A 20mm
  • 220-240V AC use T8A 20mm
  • 20-3/5"W x 7"H x 21-1/5"D
  • 46 lbs.
Questions & Answers View All
See All Allen & Heath Powered Mixers

© Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy | Accessibility Statement

Bizrate reviews (opens in new window)
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.