Skip to main content Skip to footer
Get 10% Off Select Orders $99+ or Call 800-348-5003 For Even Better Deals

  • Alert Me
  • Print

Audio-Technica AT-LP7 Fully Manual Belt-Drive Turntable

  • Write a Review

Audio-Technica knows how critical a cartridge plays in reproducing high-fidelity audio from vinyl. The AT-LP7 is a fully manual, belt-drive turntable...Click To Read More About This Product

Reserve Now
This item is temporarily out of stock but is available to reserve now with no charge to you until the item ships.
Gold Coverage: (What’s This?)
    Warranty Options

  • Shipping (48 Contigous U.S. States)
    FREE WITH FIRST CHAIR REWARDS
  • Your Price :
    $849.00
Reserve Now
SKU 
L78295000001000
Add to Wish List

Earn up to 4,245 reward points.

OVERVIEW

Fully manual, belt-drive turntable produces high-fidelity audio.

Audio-Technica knows how critical a cartridge plays in reproducing high-fidelity audio from vinyl. The AT-LP7 is a fully manual, belt-drive turntable designed around the VM cartridge line, incorporating the finest materials and structures in support of the cartridge’s performance. The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus. That stylus can be replaced with any of the six VM styli, so users can upgrade the stylus without buying a new cartridge.

The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors. It includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.

The turntable chassis is constructed of 40 mm-thick MDF. MDF is an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene. It is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation speed of 33-1/3 or 45 RPM. The AT-LP7 also includes a built-in switchable phono/line preamp for connection to components with or without a dedicated phono input. It also features a selector switch to designate operation with a moving magnet or moving coil cartridge.

FEATURES
  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • VM520EB Dual Moving Magnet Cartridge provides outstanding channel separation and extended frequency response, and allows for easy replacement with any VM stylus
  • J-shaped tone arm features a metallic gimbal suspension system and precision bearings for excellent tracking
  • Built-in switchable phono pre-amplifier with selectable modes for moving magnet or moving coil cartridges
  • 20 mm-thick, anti-resonance, polyoxymethylene platter
  • 40 mm-thick MDF (medium density fiberboard) chassis
  • Lightweight AT-HS10 headshell
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, and dust cover

High-fidelity audio for your vinyl. Order your AT-LP7 turntable today.

SPECIFICATIONS
Specs
  • Type: 2-speed, fully manual operation
  • Motor: DC motor
  • Drive Method: Belt drive
  • Speeds: 33-1/3 RPM, 45 RPM
  • Turntable Platter: Polyoxymethylene
  • Wow and Flutter: <0.08% WRMS (33 RPM) at 3 kHz
  • Signal-to-Noise Ratio: >60 dB
  • Pre-amp “PHONO”: 4.5 mV nominal at 1 kHz, 5 cm/sec
  • Pre-amp “LINE (MM)”: 280 mV nominal at 1 kHz, 5 cm/sec
  • Phono Pre-Amp Gain: MM: 36 dB nominal, RIAA equalized
  • MC: 56 dB nominal, RIAA equalized
  • Power Supply Requirements: 100 to 240 V AC, 50/60 Hz, 0.6 A max.
  • Power Consumption: 5.5 W
  • Dimensions: 17.72" W x 13.86" D x 6.18" H
  • Weight: 18.30 lbs., without dust cover
  • Accessories Included: VM520EB Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; dust cover
  • Replacement Cartridge: VM520EB
Tonearm Specifications
  • Type: Static balanced J-shaped tonearm
  • Effective length: 247 mm
  • Overhang: 17 mm
  • Maximum tracking error angle: Less than 2.5°
  • Stylus pressure adjustment range: 0 to 2.5 g
  • Applicable cartridge weight range (including headshell): 15 to 20 g

This oversized item has special shipping requirements

Restrictions

Reviews
Loading....
Customer Service

Sign up for the latest deals!

2022© Woodwind & Brasswind. All rights reserved.     Do Not Sell My Info (CA Only) | Terms & Conditions | Privacy Policy | Accessibility Statement

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.