The Aviom Starter System includes the Aviom A-16II Personal Mixer, Aviom AN-16/i 16-Channel Input Module, and the Aviom MT-1 Mic Stand Mount -- the e...Click To Read More About This Product
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.Customers Also Viewed:
16-channel personal monitor mixer for the one one or two-person studio.
The Aviom Starter System includes the Aviom A-16II Personal Mixer, Aviom AN-16/i 16-Channel Input Module, and the Aviom MT-1 Mic Stand Mount -- the essential equipment to get your home recording studio up and running.
A-16II Personal Mixer
The Aviom A-16II Personal Mixer allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer is a 16-channel digital mixer which gives each performer completely independent control over channel volume, grouping, pan, and stereo spread, as well as master volume and tone. Every performer gets a completely customized monitor or cue mix. Each user can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
The stereo output from the A-16II can be used to drive virtually any output device--from wired or wireless in-ears or headphones to powered floor wedges, an amplifier, or spot monitors.
Audio is taken from an existing console, using a combination of up to 16 direct outs, inserts, auxes, or groups. These sixteen channels are fed to a Pro16 Input Module, such as the AN-16/i, and are then distributed digitally to an unlimited number of Personal Mixers using Cat-5e cables. Set-up is simple and quick.
Personal Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable (included). The A-16II can be mounted on a standard mic stand or music stand.
AN-16/i 16-Channel Input Module
The Aviom AN-16/i converts 16 balanced line-level analog audio channels into uncompressed, full bandwidth 24-bit digital audio transmitted via A-Net. Placed at a front-of-house or monitor console, the AN-16/i can be used as a head-end for a Pro16 Monitor Mixing System. Used in conjunction with the AN-16/o Output Module, the AN-16/i can also be used in a digital snake as an input path for main return signals from front-of-house.
The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital (48kHz, 24 bits, no compression) and transmitted in real time via A-Net, up to 500 feet over a Cat-5e cable. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.
In most uses, audio from a console--any combination of channel inserts, direct outs, submixes, auxes, or groups--is connected to the input channels on the AN-16/i. The A-Net Out on the AN-16/i is connected to the A-Net In of a Pro16 Personal Mixer (such as the A-16II) or an A-Net Distributor.
The built-in A-Net Expansion jack allows two 16-channel A-Net streams to be combined onto a single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used to combine up to four 16-channel streams onto a single cable in a variety of bi-directional configurations up to 32x32, 48x16, or 64x0.
MT-1 Mic Stand Mount
The Aviom MT-1 allows the Aviom A-16II Personal mixer or A-16CS Control Surface to be mounted on a standard microphone stand. The MT-1 attaches with three screws to the bottom of an A-16II or A-16CS and mounts on any standard mic stand.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.