Skip to main content Skip to footer

BASSBOSS AT212-3K Dual 12" 2-Way Powered Top Loudspeaker

  • Write a Review

Designed for use with a large subwoofer to create a full-range, 3-way sound system, the AT212 2-way powered loudspeaker features a tall, slim design ...Click To Read More About This Product

Reserve Now
This item is temporarily out of stock but is available to reserve now with no charge to you until the item ships.
Gold Coverage: (What’s This?)
    Warranty Options

  • Shipping (48 Contigous U.S. States)
  • Your Price :
Reserve Now
Add to Wish List

Earn up to 22,475 reward points.


Dual 12" woofers and massive 3,000W RMS output.

Designed for use with a large subwoofer to create a full-range, 3-way sound system, the AT212 2-way powered loudspeaker features a tall, slim design that positions its horn above your audience when stacked. Despite its potent 3,000W RMS power module, dual 12" drivers and road-ready cabinet construction, the AT212 weighs only 89 lb., making it possible for one person to maneuver and stack it with other speakers in a larger setup.

The advantages offered by BASSBOSS tops are their coherence, accuracy, dynamic resolution and robust reliability. These tops are designed to integrate with the BASSBOSS subwoofers to create accurate, dynamic and coherent systems that work together to ensure the best possible results from top to bottom.

The cabinet is built of 15 mm Baltic Birch plywood and features an 18mm baffle with dado joinery, 4 steel bar handles, and a 15° side angle trapezoid shape. The cabinet features 5 handles and 8 fly points, with 80 x 60° rotatable coverage for multiple applications including ground stack and horizontal or vertical flying. Weatherized versions are available for outdoor installations.

The AT212 cabinets can be combined in arrays of 3 or more cabinets. The horn can be rotated and the boxes packed side-by-side to form arrays that cover 90, 120, 150, 180° and more.

BASSBOSS cabinets are hand-built in the USA. Constructed from 15mm Baltic Birch plywood, using dado joints, screws and advanced composite adhesives. Created to stand up to repeated use and abuse, the AT212 cabinet is finished in an extremely rugged, black polyurethane coating. Drivers are protected by a black powder-coated, perforated steel grill, and the amp is recessed into the back of the cabinet for protection from damage, direct sun and moisture.

The AT212 vented cabinet features 2 x 12″ mid-bass drivers and a 1.4″ throat horn-loaded compression driver. The low-frequency section features a pair of 12″ woofers in a vented enclosure. The woofers feature cast aluminum baskets, neodymium motors and 4″ diameter voice coils. The high-frequency section features a 2.5″ voice coil, 1.4″ exit compression driver loaded on an 80 x 60° degree cast aluminum horn.

All the drivers feature neodymium motor structures for the highest efficiency to weight ratio. The LF drivers have 4″ voice coils and the 1.4″ exit compression driver has a 2.5″ voice coil. The woofer coils are copper whereas the compression driver voice coil is aluminum. High-intensity Neodymium magnets are lighter and provide higher efficiency so the result is a lighter and louder cabinet.

BASSBOSS was born out of a passion for ultra-deep low-end, and a belief that tight, clean, accurate bass is the foundation of great sound. Each BASSBOSS product is a mindfully engineered, painstakingly tuned, completely integrated audio system, intended to seamlessly pair with other BASSBOSS products. BASSBOSS products are designed, CNC machined, built and assembled by hand in Austin, Texas, using only premium components. Like its siblings in the BASSBOSS lineup, the AT212 loudspeaker is optimized for full-power usage. That is to say, it's intended to be pushed hard and abused, gig after gig. So, don't hold back—crank it up.

  • Tall, slim design raises horn above audience when stacked atop subs
  • Dual 12" low-frequency drivers with waterproof cones
  • Designed for use with subwoofer
  • Enabled for line array arrangement
  • Massive 3,000W RMS output from Class-D amp

Ideal for stacking atop subwoofers—order today.

Speaker Configuration
  • Active/passive: Active
  • Type: 2-way, full-range
  • LF driver: Dual 12"
  • MF driver: Not applicable
  • HF driver: 1.4"
  • Amplifier class: D
  • Wattage: 3,00W RMS
  • Mixer/preamp: Not applicable
  • Frequency response: 45Hz–18kHz
  • Coverage pattern: 80 x 60°
  • Peak SPL: 139 dB
  • Continuous SPL: 136 dB
  • XLR: 1
  • TRS: Not applicable
  • TS: Not applicable
  • RCA: Not applicable
  • SPEAKON: Not applicable
  • XLR: 1
  • TRS: Not applicable
  • TS: Not applicable
  • RCA: Not applicable
  • SPEAKON: Not applicable
  • Cabinet material: 15 mm Baltic Birch
  • Width: 14.3"
  • Height: 47.5"
  • Depth: 17.75"
  • Weight: 89 lb.

This oversized item has special shipping requirements


Questions & Answers View All
Questions & Answers
Customer Service

Sign up for the latest deals!

2023© Woodwind & Brasswind. All rights reserved.     Do Not Sell My Info (CA Only) | Terms & Conditions | Privacy Policy | Accessibility Statement

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.