Earn up to 8,995 reward points.
Open up a new world of performance that lets you mix and master with painstaking accuracy.
With the TrueBass 18S, Dynaudio applied advanced DSP modeling technology that acoustically matches 18S to any Dynaudio Pro Studio Monitor from BM Classic, LYD and upwards, turning two-way systems into three-way set-ups. Its punch is delivered by two MSP+ Hybrid Drive units and a 500W amp for absolute control and power. Getting the 18S to match seamlessly with Dynaudio professional monitors is key for absolute accuracy when mixing and mastering. With this information at its disposal, the 18S’s display and menu system lets you select the specific Dynaudio speakers you’re using in your monitoring setup, meaning the roll-off can be tailored perfectly to suit. Plus, if you combine a LYD 48 stereo or surround setup, you’ll essentially have a full-blown four-way monitoring system at your disposal. The 18S also has a selection of RCA or XLR connections for flexibility with your studio setup, and comes with a number of handy features to help more advanced systems. This includes the ability to set a time delay to ensure the sub and speakers are working perfectly in sync. There’s also a full three-filter parametric EQ to easily defeat room modes that could affect the accuracy of your final recording.
MPN: 962142- 500-watt state-of-the-art Class D amplifier module
- Dual 9" MSP+ Hybrid Drive long-throw woofers for accurate low-end frequency reproduction
- Advanced DSP with presets for a wide range of Dynaudio Pro studio monitors
- Preset speaker crossover filters
- Time alignment for adjusting according to position
- Three-band, built-in Parametric EQ
- Dual opposing driver design principle
- 16-230Hz frequency range
- Master/Slave feature for daisy-chaining multiple subwoofers
Order the Dynaudio TrueBass 18S Dual 9.5" Powered Studio Subwoofer in black today.
- System: Twin opposed 9" driver, closed box, active DSP subwoofer
- Analog inputs: 2 x balanced XLR, 2 x unbalanced RCA phono
- Analog outputs: 2 x balanced XLR, 2 x unbalanced RCA phono
- Frequency response (±3dB): 16Hz – 230Hz
- Max SPL (1m, pair): 110dB
- Auto ON/OFF: Yes
- Box principle: Sealed
- Low pass filter: Adjustable/preset
- Phase adjustment: 0/180 degrees
- Woofer: 2 x 9.05" MSP+ Hybrid Drive
- Amplifier: 500W Class-D
- AC power input: 100-120V/220-240V 50/60Hz
- Standby power consumption: < 0.5W
- Maximum power consumption: 490W
- Weight: 45.2 lb.
- Dimensions (L x D x H): 17.59" x 10.55" x 11.81"
- I/O Connectors: XLR balanced/RCA
