Skip to main content Skip to footer

  • Alert Me
  • Print

Focusrite ISA ADN2 2-Channel Dante Network A/D Card for ISA One

  • Write a Review

With the introduction of the ISA ADN2, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the...Click To Read More About This Product

Order Now!
This item may require additional delivery time. Contact us for more details.
Gold Coverage: (What’s This?)
    Warranty Options

  • Shipping (48 Contigous U.S. States)
  • Your Price :
Reserve Now
Add to Wish List

Earn up to 2,500 reward points.


Can be implemented directly on a Dante network.

With the introduction of the ISA ADN2, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI.

Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz. The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output. Word Clock I/O on BNC connectors allows synchronisation with many external devices.

Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.  Both RedNet Control and Dante Controller software are included.

Now comes with Brainworx bx_console Focusrite plug-in

This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the new bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware. 

If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.

  • Two-channels of high-quality, precision analogue-to-digital converter for ISA One
  • Up to 24-bit/192kHz sample rate
  • Dante connectivity via Primary and Secondary Ethernet ports provide redundancy and auto switchover in case of failure
  • Two-channel XLR connection for AES3 output
  • Two-channel RCA connection for S/PDIF output
  • Two-channel TOSLINK connector for ADAT output
  • Word Clock I/O on BNC connectors allows synchronization with many external devices
  • RedNet Control and Dante Controller software (included) allow Dante routing and control from a computer; no hardware patching required
  • Manufacturer's 3-year warranty
  • Included Software:
    • RedNet Control
    • Dante Controller
    In the box:
    • SA ADN2 Two-channel A-D Card
    • Safety Information cut sheet
    Focusrite Pro Important Information Guide:
    • Focusrite Pro Important Information Guide provides links to: RedNet Control 2, Audinate Dante Controller (installed with RedNet Control 2)
    • Prop 65 warning needed for California residents:
    • WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go

    Connect to any Focusrite Rednet device. Order today.

    Audio Performance
    • 0 dBFS Reference Levels: 22dBu
    • Frequency Response: 20Hz–20kHz ±0.1dB
    • THD+N: -105dB (0.0006%) unweighted, 20Hz–20kHz; -1dBFS input
    • Noise in Presence of Signal: -121dBu 'A'-Weighted (typical)
    • Dynamic Range: 121dB 'A'-weighted (typical), 20Hz–20kH
    Digital Performance
    • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24-bit
    • Clock Sources: Internal or Word Clock
    • Input to Input: < -100dB; 20Hz–20kHz (driven channel at -20dBFS)
    Front Panel Output Connectivity Dante
    • Channel Count: 2 x Dante channels
    • Output: 2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above)
    • Channel Count: 2 x AES3 channes
    • Output: 1 x Male XLR
    • Channel Count: 2 x ADAT channels
    • Output: 1 x TOSLINK connectors
    • Channel Assignments @ 44.1kHz, 48 kHz: Port 1 = Channels 1 -2
    • Channel Assignments @ 88.2kHz, 96 kHz: SMUXI: Port 1 = Channels 1 -2
    • Channel Assignments @ 176.4kHz, 192 kHz: SMUXII: Port 1 = Channels 1 -2
    • Channel Count: 2 x S/PDIF channels
    • Output:1 x RCA phono socket
    Word Clock
    • Word Clock Input: 1 x BNC 75 Ohm port (Switchable Termination)
    • Word Clock Output: 1 x BNC 75 Ohm port

    This oversized item has special shipping requirements


    Questions & Answers View All
    Questions & Answers
    Customer Service

    Sign up for the latest deals!

    You are changing the Ship-To country.

    Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.