Earn up to 3,500 reward points.
Network with any Dante enabled device.
With the introduction of the ISA ADN2, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz. The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIF output.
Word Clock I/O on BNC connectors allows synchronisation with many external devices. Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. Both RedNet Control and Dante Controller software are included.With the introduction of the ISA ADN8, the classic ISA mic pre can be implemented directly on a Dante network, providing console-grade preamps to the most advanced of audio networks. ISA ADN8 is an optional eight-channel A-D card that provides high-quality, precision analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps.
Featuring Dante, AES3 and ADAT connectivity, the card operatesat sample rates up to 24-bit/192kHz. The card offers a familiar set of standard professional connectors with primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation with many external devices. Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller. Both RedNet Control and Dante Controller software are included.
Now comes with Brainworx bx_console Focusrite plug-in
This awesome plug-in recreates the analog signal paths of Focusrite’s revered ISA 110 and ISA 130 modules, which were a part of the Focusrite Studio Console. Designed and coded by the DSP geniuses at acclaimed software house Brainworx, the new bx_console Focusrite VST/AU/AAX plug-in for Mac and PC faithfully captures the sound, feel and styling of the original iconic hardware.
If you purchased any Red, RedNet or ISA solution from January 2020 on, you will have the plug-in available in your Focusrite account as long as you’ve registered your product.
- Eight-channels of high-quality, precision analogue to digital converter for ISA 428 MkIIand ISA 828 MkII
- ï‚·Up to 24-bit/192kHz sample rate
- ï‚·Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
- ï‚·Industry standard eight-channel AES59 DB25 output connection for AES3ï‚·Two TOSLINK connectorsfor ADAT (8 channels at up to 96kHz; 4 channels at 192kHz)
- ï‚·Word Clock I/O on BNC connectors allows synchronisation with many external devices
- ï‚·RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
Connect, convert and power up. Order today.
- 0 dBFS Reference Levels: 22dBu
- Frequency Response: 20Hz–20kHz ±0.1dB
- THD+N: -105dB (0.0006%) unweighted, 20Hz–20kHz; -1dBFS input
- Noise in Presence of Signal: -121dBu 'A'-Weighted (typical)
- Dynamic Range: 121dB 'A'-weighted (typical), 20Hz–20kHz
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
- Clock Sources: Internal or Word Clock
- Input to Input: < -100dB; 20Hz -20kHz (driven channel at -20dBFS)
- Channel Count: 8 x Dante channels
- Output: 2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).
- Channel Count: 8 x AES 3 channels
- Output: 1 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)
- Channel Count: 8 x ADAT channels
- Output: 2 x TOSLINK connectors
- Channel Assignments @ 44.1 kHz, 48 kHz: Port 1 = Channels 1 -8 ,
- Port 2 = Channels 1 -8
- Channel Assignments @ 88.2 kHz, 96 kHz: SMUXI: Port 1 = Channels 1 -4, Port 2 =
- Channels 5 -8
- Channel Assignments @ 176.4 kHz, 192 kHz: SMUXII: Port 1 = Channels 1 -2 , Port 2 =
- Channels 3 -4
- Word Clock Input: 1 x BNC 75Ω port (Switchable Termination)Word Clock Output: 1 x BNC 75 Ohm port
