Skip to main content Skip to footer

  • Alert Me
  • Print
Langevin Logo

Langevin All-Discrete Pultec EQP-1A

  • Write a Review

The Langevin All-Discrete Pultec EQP-1A is the solid-state version of Manley's Enhanced Pultec EQP-1A (#620887), their interpretation of the historic...Click To Read More About This Product

Order Now!
This item may require additional delivery time. Contact us for more details.
Gold Coverage: (What’s This?)
    Warranty Options

  • Shipping (48 Contigous U.S. States)
  • Your Price :
Reserve Now
Add to Wish List

Earn up to 5,850 reward points.


A tranformerless EQ known to have an incredibly sweet top end.

The Langevin All-Discrete Pultec EQP-1A is the solid-state version of Manley's Enhanced Pultec EQP-1A (#620887), their interpretation of the historic Pultec Equalizer as originally produced by Pulse Techniques, Inc. Manley has been building these Manley Pultec EQs since 1990, after hunting down the original Pultec designer, Eugene Shenk, in deepest darkest New Jersey, to ask for his permission and blessings to produce the Manley own version of his classic piece. The Langevin Pultec units employ Manley's own simple and clean solid-state all-discrete make-up gain block to reamplify the signal after the passive EQ circuit.

EQ may be set to flat positions or bypassed entirely. All Boost and Cut controls are continuously variable conductive plastic potentiometers for absolutely silent operation and long life. Manley single-rack-unit monoblocks occupy one-third of the space of the "antique Pultecs," an important consideration for allocation of outboard rack space. And, you'll notice, that Manley added a couple extra frequencies too. The rear-mounted input switch selects 0 degrees or 180 degrees Phase Invert for the balanced gold-pin XLR input or the transformerless unbalanced bridging input (1/4" jack) may be selected in that switch's middle position.

People often ask us if Manley Pultec EQ's sound like the old ones to which we reply, "Yes! But better!" The originals had three transformers in the signal path whereas this Langevin Pultec is completely transformerless. Manley's all-discrete line amp is really clean and natural sounding. The components Manley uses today just weren't available in the 1960's. So, if you want a project with crackling carbon pots, dirty open frame wafer switches, 5% and 10% tolerance noisy carbon resistors, exposed tubes sticking out the back of the 3U chassis, etc., go pay top dollar for an antique Pultec!

Kick drum? Bring on the Pultecs! You'll soon discover the power and magic of having those individual Low Frequency Boost and Cut controls in that LF shelf circuit... Need a little clarity or extension? Try that middle bell-shaped Boost dialing in the sharpness of the boost on the Bandwidth control. Something bugging you? Ease it off with the HF shelf control. You'll see: There's no substitute for a Pultec! The Langevin unit works the same way as the Manley unit but has an ALL-DISCRETE make-up gain amplifier instead, with both balanced and unbalanced inputs and outputs - all completely transformerless. It is known to have an incredibly sweet top end.

  • Same passive EQ section as the Manley version
  • Transformerless
  • Phase-reverse switch
  • Bypass switch
  • Silent conductive plastic Boost and Cut controls
  • Sealed gold-contact Grayhill frequency select switches
  • Balanced ins and outs via Gold XLR connectors
  • Unblanced ins and outs via 1/4" jacks
  • Factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.
  • Operating Mains Voltage changeable with power transformer changeover switch and fuse value change.

Legendary Pultec EQ within easy reach of any studio.

  • Frequency Response: ±0 dB 10 Hz to 60 KHz
  • <0.04% THD @ 1KHz
    S/N Ratio: 99 dB
  • Adjustable Feedback/Gain: -2 dB to 12 dB
  • Max. output (into 600 ohm load): +22 dBm
  • Max. output (into 10,000 ohm load): +28 dBv
  • Power Consumption (120/240 VAC): 12 watts
  • Mains Voltage Frequency: 50 60Hz
  • Dimensions: 19" X 1 3/4" X 10" (occupies 1u)
  • Shipping Weight: 11 lbs.

This oversized item has special shipping requirements


Questions & Answers View All
Questions & Answers
Customer Service

Sign up for the latest deals!

2023© Woodwind & Brasswind. All rights reserved.     Do Not Sell My Info (CA Only) | Terms & Conditions | Privacy Policy | Accessibility Statement

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.