Zoom
tier1
false
true
MMGS7/J01197000000000_MEDIA_SET
false
Peavey PVXp Sub 15" 800 Watt Powered Sub
OVERVIEW
Lightweight and heavy duty.
Peavey Electronics set the standard for affordable, feature-packed powered P.A. solutions more than four decades ago. The new Peavey PVX Series of active and passive loudspeakers are the culmination of decades of R&D and experience building the best portable, all-in-one audio solutions--bringing legendary Peavey performance and reliability to audio pros and musicians of all levels.
FEATURES
- 15" heavy-duty woofer
- Internal line level low-pass/high-pass crossover network
- Fully adjustable KOSMOS C for increased bass impact
- XLR/one quarter inch combo jack input
- Power amp has forced air cooling for maximum reliability
- Large heavy-duty locking casters
- Perforated steel grill
- Steel handles
- T-nut woofer mounting
- Rugged dado and rabbet construction plus internal braces for lightweight yet strong cabinet
- 850 watts peak available power
- Compact dimensions for a 15" woofer based sub
- Threaded pole for top speaker mount
- Two high-pass XLR outputs, one full range thru XLR output
Add a sub to your system. You won't believe the difference. Order soon.
SPECIFICATIONS
- Frequency Range, 1 meter on-axis, swept-sine in 1„2 Space environment: 51 Hz to 20 kHz
- Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 57 Hz to 20 kHz (±3 dB)
- Usable Low Frequency limit (-10 dB point anechoic): 51 Hz Nominal sensitivity (1W @1M, swept sine input in anechoic environment): 97 dB (average)
- Maximum Sound Pressure Level (1 meter): 127 dB SPL peak with music
- Radiation Angle measured at -6 dB point of polar response: Nominal: 100 degrees horizontal X 50 degrees vertical (Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to straight ahead being +15, -35 degrees)
- Transducer Complement: Heavy-duty 15" woofer with 2-3/8" voice coil & 50 oz. magnet, RXTM 14 1.4" titanium diaphragm dynamic compression driver
- Box Tuning Frequency: 57 Hz Electroacoustic crossover frequency: 2,800 Hz
- Crossover type: Internal Electronic two-way crossover with driver EQ, level matching, bass boost and subsonic filtering.
- Crossover Slopes: 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with staggered poles and driver EQ.
- Input Connections:
- One combo female XLR and 1/4" phone jack providing balanced line-level operation from the 1/4" jack section, and high-output dynamic microphone operation from the XLR section.
- Output Connections: One male XLR and one 1/4" phone jack. The Thru jacks are intended for the use of linking multiple PVXpTM15 enclosures in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input signal.
- Enclosure Materials & Finish: Black ABS plastic with textured surface, black powder-coated perforated grille. Also available in white.
- Mounting provisions: Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom. Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use the Peavey VersamountTM 70+ mounting bracket. Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom.
- Dimensions (H x W x D):
- Front: 28.25" x18.90" x18.71"
- Rear: 26.25" x10.25" x18.71"
- Net Weight: 51lb
- Electronics and amplifier specifications:
- Internal power amplifiers (@120 VAC line):
- Total of 800 watts peak available power Woofer - 650 watts peak available power Continuous Power*: 325 watts @ less than 1% distortion Tweeter - 150 watts peak available power Continuous Power: 75 watts @ less than 1% distortion. * Before thermal pullback activates.
- Electronic Input Impedance (Nominal):
- Line: 2.2 k ohms balanced (1/4"), 10 k ohms unbalanced 1/4" Mic: 2.2 k ohms balanced (XLR) No phantom power available.
- Input Sensitivity for Full Output (Level full CW): 1/4" TRS Phone jack - 0.54 V RMS, XLR jack - 0.12 V RMS Infrasonic filter protection: 36 dB/octave roll-off Nominal Amplifier Frequency Response: +0, -3 dB from 20 Hz to 20 kHz Hum and Noise: Greater than 90 dB below rated power
- DDTTM Dynamic Range: Greater than 21 dB THD and IM: Typically less than 0.5 % Damping Factor: Greater than 100 @ 1000 Hz, 8 Ohms Power requirements of Peavey PVXp 15 System: Nominal 370 Watts, 100-120 VAC 50-60 Hz
false
{"id": "J01197",
"skuOrProductId": "J01197",
"categoryId":"site8YAEB",
"name":"PVXp Sub 15" 800 Watt Powered Sub",
"pageUrl":"/Peavey-PVXp-Sub-15-800-Watt-Powered-Sub-J01197.wwbw",
"thumbnailUrl":"https://media.wwbw.com/is/image/MMGS7/NonExistingImage-00-120x120.jpg",
"addToCartUrl":"/Peavey-PVXp-Sub-15-800-Watt-Powered-Sub-J01197.wwbw",
"hasFeatures":"0",
"isAccessory":"0",
"message":"Peavey Electronics set the standard for affordable, feature-packed powered P.A. solutions more than four decades ago. The new Peavey PVX Series of active and passive loudspeakers are the culmination of decades of R&D and experience building the best portable, all-in-one audio solutions--bringing legendary Peavey performance and reliability to audio pros and musicians of all levels.",
"value":"350.00",
"priceMin":"350.00",
"priceMax":"699.99",
"priceSavingsMaxPrice":"0.00",
"priceSavingsMaxPercent":"0",
"inventory":"0",
"brand":"Peavey",
"reviewStarImageUrl": "https://static.wwbw.com/img/brand/mf/cmn/Sprit-Sm-Stars.png",
"reviewStarRating":"0.0",
"reviewStarRatingInteger":"0",
"reviewHowManyReviews":"0",
"usedOrNew":"new",
"discontinued":"1",
"onOrder":"0",
"clearance":"0",
"canBeSold":"0",
"accessoryCategories":"site8LKP,site8LY,site8LKC",
"stickerText": "",
"checksum":"",
"priceVisibility": "1"}