PreSonus Temblor T10 10" Powered Studio Subwoofer (Each)
true
true
- Write a Review
The Temblor T10 10" Powered Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer ...Click To Read More About This Product
- SKU
- J00733000000000 J00733000000000
Earn up to 2,250 reward points.
Great add-on to an existing monitoring system.
The Temblor T10 10" Powered Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10" composite low frequency driver with a frequency response of 20–200Hz and a maximum SPL of 110dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250-watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30dB to +6dB, a 0 or 180 phase switch, and a ground lift switch.
You can connect to the subwoofer via a pair of balanced XLR inputs, a balanced pair of 1/4" TRS inputs, or an unbalanced pair of RCA inputs. The subwoofer also includes a balanced pair of XLR pass-through outputs, a balanced pair of 1/4" TRS pass-through outputs, and a balanced XLR sub output. The unit features a 120/240 VAC switchable power supply to accompany studio monitors in different regions.
- 10" Composite Low Frequency Driver
- 110dB Continuous Maximum SPL
- 250 watts of Class AB Amplification
- Variable 50Hz to 130Hz Low Pass Filter
- 1/4" TRS Bypass Footswitch Jack
- Continuously Variable Input Gain
- Phase Switch
- Pass-Through For Additional Connections
- Reinforced MDF Cabinet with Bracing
- 20Hz to 200Hz Frequency Response
Put some boom in your room. Order today.
- Transducer 10" Composite
- Power 250 W
- Amplifier Type: Class AB
- Maximum SPL: 110dB continuous
- Controls Input gain: continuously variable from -30dB to +6dB
- Low pass filter: continuously variable from 50 to 130Hz
- Phase switch: 0 and 180
- Ground lift switch
- Inputs: Left and right balanced XLR
- Left and right balanced 1/4" TRS
- Left and right unbalanced RCA
- Outputs: Left and right balanced XLR pass-through
- Left and right balanced 1/4" TRS pass-through
- Balanced XLR Sub out
- 1/4" Sub bypass
- Design: Front firing bass-reflex acoustic port
- Internal dampening and heat sink
- Construction: Resonance-suppressing internal bracing
- Internal dampening and heat sink
- Frequency Response: 20H to 200Hz
- Crossover Frequency: Variable 50Hz to 130Hz
- Voltage: 100 to 120 VAC at 50/60Hz, 220 to 240 VAC at 50-60Hz
- Dimensions: (W x H x D) 13.19" x 16.14" x 16"
- Weight: 31.7 lb.
