Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp
true
true
- Write a Review
The PZ-Pro is a two channel instrument preamp, switcher, and performance control station designed for stage musicians who are serious about their ton...Click To Read More About This Product
-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodL79084&isStyle=true"
}
- SKU
- L79084000000000 L79084000000000
Earn up to 3,200 reward points.
Dual input channels allow you to switch between two sources or blend them together.
The PZ-Pro is a two channel instrument preamp, switcher, and performance control station designed for stage musicians who are serious about their tone and like being in the driver's seat. Dual input channels allow you to switch between two sources or blend them together, with full control over the sound of each instrument, and the ability to bring effects pedals and a signal booster into the mix with a single footswitch.
Each channel on the PZ-Pro has its own semi-parametric equalizer section and input level, along with individual filter controls to reduce feedback on stage. Channel-B also features a microphone input to allow any dynamic or condenser microphone to be used,including clip-on instrument mics or even vocal microphones. An FX Loop with a wet/dryknob provides the ability to blend in as much or as little pedal effects as desired, with a footswitch to bring them in and out of the signal chain at a moment's notice.
Finally,once your tone is completely dialed-in, balanced XLR direct outs feed the PA system or
a recording interface, with both Pre-EQ and Post-EQ outputs available.
Technical Specifcations: *
- Two independent input channels with separate EQs
- Microphone input on channel-B with 48V phantom power
- EFX Loop and clean Boost with footswitch control
- Balanced pre and post-EQ outputs to feed PA/Monitors
- Switch/Combine instruments with a clip-on or vocal mic
- PZ Boost circuit to optimize for use with piezo transducers
- Selectable High-Pass/Notch filter to reduce on-stage feedback
- Reconfigure the EFX/Boost footswitch to suit your setup
-
Take total control over your tone. Order today.
- Audio Circuit Type: Proprietary active circuit
- Number of channels: 2x Inputs, Mono Pre and Post EQ XLR balanced Out
- Frequency Response: 20Hz - 20kHz ±0.5dB
- Input Gain: +20dB (Instrument Input), +55dB (Mic Input)
- Boost Gain: +10dB (PZ Boost) +15dB (Variable Boost)
- Maximum Input- Instrument: +20dBu
- Maximum Input - Microphone: 0dBu
- Clip Level: +10dBu @ XLR output
- Total Harmonic Distortion: <0.005% (+4dBu, 20Hz-20kHz, unity gain)
- Input Impedance: 220k Ohms at input jack (10Meg Ohms when PZ Boost active)
- Output Impedance - XLR: 150 Ohms
- Output Impedance - 1/4" Amp Out: 1k Ohms
- Output Impedance - Tuner Out: 2.6k
- Ohms Noise: -91dB
- General Specifcations:
- Construction: 14-gauge steel
- Size: 9.10"L x 5.32"W x 1.82"H (231 x 135 x 46mm)
- Weight: 5.0lbs (2.27kg)
- Power: 15VDC, 400mA (center pin positive)
- FCC Approval: Complies with section 15 of the FCC rules
- Conditions: For indoor use at temperatures between +5°C and +40°C
- Warranty: Radial 3-year, transferable
This oversized item has special shipping requirements
Restrictions
- Contact Us
- FAQs
- Support Center
- Track My Order
- Wish List
- Site Map
- Our History
- Testimonials
- Donations
- Press Room
- Educators
- Affiliates
- Financing
- Protection Plans
- Professional Services
- Gift Certificates
-
International:
Sign up for the latest deals!
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.
