"pageType" : "item_page",
"placements" : "3",
"placementNames" : "recommended-accessories_bottom_1,others-viewed_bottom_1"
Expandable modular press box that distributes audio to multiple destinations simultaneously.
The mPress provides full control over any size of press gathering, from community gatherings to international events, and its modular design means it can grow to suit your needs. It features two balanced mic or line inputs with low-noise preamps and high-pass filters, along with a shared limiter to avoid clipping the inputs of any connected recording devices.
Separate outputs are provided for a set of powered speakers, with dedicated program inputs that allow you to play background music through the PA when on standby, and a headphone output to silently monitor and cue up playback tracks. The main outputs are controlled separately from the press gallery signals, so you can make adjustments on the fly without affecting previously calibrated recording devices.
- Press box and splitter with expandable outputs
- Dual mic preamps with on-board limiter
- Program inputs for background music playback
- Built-in test tone for easy calibration and troubleshooting
Ideal signal hub for press events.
Audio circuit type: Low Noise Active BufferFrequency response: 20Hz to >20KHz +0/-1.5dBDynamic range: >112dBGain: +51dB (Microphone), 0dB (Line Input), +19dB (Program)Clip Level: +24dBu/+17dBu (Main Output)Total harmonic distortion: <0.001% @ +4dBIntermodulation Distortion: 0.002% (Main Output)Phase Deviation: ±15° (Exo-Pod Output)Input Impedance: 7k Ω (Microphone), 22K Ω (Program)Output Impedance: 880 Ω (Main Output), 115 Ω (Exo-Pod Output)Equivalent Input Noise: -111dBu (Main Output)Noise: -94dBu (Microphone), -80/-92dBu (Exo-Pod Output - Program In to Main Out)Features
- Input Connectors: 4 XLR female inputs, 6 ¼" program inputs, XLR power supply input
- Output Connectors: 2 XLR male gallery outputs, 2 XLR male main outputs, 6 XLR male Exo-Pod/gallery outputs, 2 ¼" main outputs
- Extras: Low-Cut Filter: 100Hz (12dB/Octave) (Microphone), Limiter Threshold: -10dBu to +5dBu Output (Microphone), Limiter Ratio (>20:1) (Microphone), Microphone Signal Present LED Threshold: -70dBu/-54dBu/-42dBu (Exo-Pod Output)
- Construction: 14-gauge steel chassis & outer shell
- Size (L x W x D): 19" x 7" x 1.62" (48.26cm x 17.8cm x 4.13cm)
- Weight: 6.25lb (2.83kg)
- Shipping size (L x W x D): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
- Shipping weight: 8.9lb (4.04kg)
- Power: ±15V/+5V custom power supply
- Conditions: For use in dry locations only between 5°C and 40°C
Questions & Answers View All