-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodH68493&isStyle=true"
}
- Product H68493
Shure PGXD14/BETA98H Digital Wireless System With BETA 98H/C Mic
false
false
The PGXD14/BETA98H digital wireless system from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.
Customers Also Viewed:
Mic-up horns and percussion instruments with this convenient, quality wireless mic system.
The PGXD14/BETA98H digital wireless system from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the BETA 98H/C, a precision-engineered miniature cardioid condenser microphone with integrated clip and gooseneck for horn applications, as well as a PGXD1 bodypack transmitter and a PGXD4 receiver.
The BETA 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shockmount reduces the transmission of instrument "key noise" and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
The rugged PGXD1 bodypack transmitter easily clips onto a belt or guitar strap, and provides you with a 20Hz–20kHz frequency range, up to 10 hours of continuous use on 2 standard AA batteries (not included), and 200' of wireless freedom.
The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection and greater reliability thanks to its true digital diversity.
- Rugged, compact bodypack with belt clip and instrument cable
- 20Hz–20kHz frequency range captures every nuance of your tone
- Power, mute and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200' (60m) operating range
- 26dB of continuously adjustable gain to match variable input levels
- 24-bit/48kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1.4" and XLR audio outputs
- Included padded carrying case for portability and protection
- 1.6m hard-wired cable
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Interchangeable microphone cartridges are available:
- RPM108 - Cardioid cartridge
- RPM110 - Supercardioid cartridge
- Audio input level: +10 dBV maximum, at minimum gain setting -16 dBV maximum, at maximum gain
- Gain adjustment range: 26dB
- Input impedance: 1 Mohm
- RF Output Level: 10 mW maximum (dependent on applicable country regulations)
- Dimensions (HxWxD): 108 x 64 x 19 mm (4.25" x 2.50" x 0.75")
- Weight: 128 g (4.5 oz.) without batteries
- Housing: Molded polycarbonate case
- Power requirements
- Battery Life: Up to 10 hours
- Dimensions (HxWxD): 40 x 181 x 104 mm (1.6" x 7.125" x 4.1")
- Weight: 289 g (10.2 oz.)
- Housing: ABS
- Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3,000 ohm load): –2.5dBV 1/4" connector (into 10,000 ohm load): +10 dBV
- Impedance:
- XLR: 50 ohm
- 1/4": 50 ohm
- Sensitivity: –102 dBm @ 10-5 BER
- Image rejection: > 70dB, typical
- XLR output:
- Impedance balanced Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
- Audio LED:
- Red: 2dB below clip
- Amber: 12dB below clip
- Green: 50dB below clip
- Power Requirements: 12-18 VDC at 150 mA, supplied by external power supply
- Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35 mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
- Type: Condenser (electret bias)
- Frequency response: 20 to 20,000Hz
- Polar pattern: Unidirectional (cardioid)
- Output impedance: Rated at 150 ohm (actual)
- Recommended minimum load impedance: 1 kohm (May be used with loads as low as 150 ohm with reduced clipping level
- Output Level (0 dB = 1 volt per Pascal):
- Open Circuit Voltage: -56dB (1.6mV)
- Output Clipping Level (at 1kHz, THD < 1%):
- 2.5 kohm load: 11dBV (3.5V)
- 1 kohm load: 3dBV (1.4 V)
- Maximum SPL:
- 2.5 kohm: 163dB
- 1 kohm load: 155dB
- Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5 kohm load)
- Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
- Polarity:
- Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
- Recommended Operating Voltage: 11 to 52 Vdc Phantom
- Environmental conditions: Operating temperatures: –7º C to 49º C (20º F to 120º F)
- Storage temperatures: 29º C to +74º C (–20º F to 165º F)
- Relative Humidity: 0 to 95%
- Net Weight: Microphone with cable and preamplifier: 156 g (5.5 oz.)
