Shure Logo
SKU 
270783000793000

Shure ULXS124/85 Wireless Handheld/Lavalier Combo System

  • Write a Review

The Shure ULXS124/85 Standard Wireless Handheld/Lavalier Combo System includes ULX2/58 Handheld Transmitter with SM58 Microphone, WL185 Cardioid Lava...Click To Read More About This Product

Available 11-07-2017

Gold Coverage: (What’s This?)

  • Shipping (48 Contigous U.S. States)
    FREE WITH FIRST CHAIR REWARDS
  • Your Price :
    $9890.00
  Reserve Now Notify Me When This is in Stock
Add to Wish List

Earn up to 4,945 reward points.

Recommended Accessories

The Shure ULXS124/85 Standard Wireless Handheld/Lavalier Combo System includes ULX2/58 Handheld Transmitter with SM58 Microphone, WL185 Cardioid Lavalier Microphone, ULX1 Bodypack Transmitter, and ULXS4 Diversity Receiver.

ULX2/58 Handheld Transmitter Microphone
The Shure ULX2/58 Handheld Transmitter Microphone is comprised of the ULX2 Wireless transmitter fitted with the SM58 microphone capsule.

The ULX2 features include a 3-segment battery fuel gauge, backlit LCD shows group and channel, frequency and power settings, control lockout, 8 hour battery life, and a 300 ft (92 m) operating range. The ULX2 transmitter is designed to allow for interchangeable microphone cartridges.

The Shure SM58 unidirectional (cardioid) dynamic vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. It has a tailored vocal response for a sound which is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. It is consistently the first choice of performers everywhere.

WL185 Cardioid Lavalier Microphone
The WL185 Lavalier electret condenser microphone was designed for use with a wireless body-pack transmitter. It has a 4 ft. (1.2 meter) cable terminated with a miniature 4-pin mini connector. The included tie clip can be rotated in 90 degree intervals for placement flexibility. (Use of windscreen highly recommended.)

Shure ULXS4 Standard Receiver
The Shure ULXS4 Standard receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.

FEATURES
ULX2 transmitter
8-9 Hour Battery Life
Power: On/Off Switch, Battery
LED-Green When ON, Red When Battery Low
Three-segment Battery Power Icon
PEAK Icon-Appears When Audio Signal Overloads
Group/Channel Displays
SET Button for Saving Settings
Adjustable Audio Gain Control
Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
4-pin Mini Connector
Battery Cover Unscrews to Expose Battery and Gain Control
9V Battery Included

SM58 microphone
Frequency response tailored for vocals, with brightened midrange and bass rolloff
Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
Pneumatic shock-mount system cuts down handling noise
Effective, built-in spherical wind and pop filter
Supplied with break-resistant stand adapter which rotates 180 degrees
Legendary Shure quality, ruggedness and reliability
Cardioid (unidirectional) dynamic
Frequency response: 50 to 15,000 Hz

Wl185
Cardioid polar pickup pattern
Recommended for general purpose sound reinforcement applications
Good rejection of ambient noise
130 degree pickup angle

ULXS4 Diversity Receiver
Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
5-segment transmitted audio signal strength meter
RF indicator
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
XLR and 1/4-inch output
Rugged plastic chassis
1/2 rack design

SPECIFICATIONS
RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
used). Refer to the frequency supplement supplied with the system.
Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
Audio Frequency Response: 25 to 15,000 Hz, ±2 dB
NOTE: Overall system frequency response depends on the microphone element.

ULX1 Transmitter Output
Actual Impedance: 50 Ohms
Nominal Output Level: 20 mW
Maximum Output Level: 30 mW

ULX2 Transmitter Input
Input Configuration: Unbalanced, active
Actual Impedance: 20 kohms
Maximum Input Level: 10 Vp”p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.

ULX2 Transmitter Output
Actual Impedance: 50 Ohms
Nominal Output Level: 20 mW
Maximum Output Level: 30 mW
Pin Assignments: Shell = Ground Center = Signal
*Output Level: Microphone Level = Line Level ” 20 dB

ULXS4 Receiver Input
Connector Type: Antenna - BNC; Power Input ” IEC 320
Actual Impedance: Antenna 50 Ohms
Nominal Input Level: Antenna - ”95 to ”30 dBm; Power Input ” 15 Vdc
Maximum Input Level: Antenna - +6 dBm (”20 dBm recommended); Power Input - 18 Vdc
Pin Assignments: Antenna Shell = Ground Center = Signal; Power Input - IEC Standard
Voltage for Remote Power: Antenna 12 Vdc, 150 mA maximum

ULXS4 Receiver Output
Connector: High Z Audio; Low Z Audio*
Output Configuration: High Z Audio - Unbalanced (1/4 in.); Low Z Audio - Balanced (XLR)
Actual Impedance: High Z Audio - 3 kohms; Low Z Audio - 22 ohms
Pin Assignments: High Z Audio Tip = Hot Ring/ Sleeve = Gnd Low Z Audio 1 = Ground, 2 = Hot, 3 = Cold
Voltage/Current/PhantomPower Protection?: High Z Audio ” Yes; Low Z Audio ” Yes
Output Level: Microphone Level = Line Level ” 20 dB

Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
Transmitter Gain Adjustment Range: 25 dB
Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone): XLR connector (into 600 ohm load): +3.9 dBV (line), ”17 dBV (mic); 1/4 inch connector (into 3000 ohm load): ”2 dBV
Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
RF Power Output: 30 mW maximum (ULX1, ULX2)
Dynamic Range: >100 dB, A-weighted
RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typically
Ultimate Quieting (reference ±38 kHz deviation): >105 dB, A-weighted
System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
Power Requirements: ULX1, ULX2 - 9V alkaline battery (8.4 V Nicad optional);
ULXS: 14 - 18 Vdc (negative ground), 550 mA
Battery Life: 8 to 9 hours (with 9V alkaline battery)
Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F) NOTE: Battery characteristics may limit this range.

ULX2/58 Dimensions (Length x Diameter): 9 x 2 in. (228.6 x 51 mm)
ULX2/58 Net Weight: 10.2 oz. (289 g) without battery

ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
ULX1 Net Weight: 79 g (2.8 oz.) without battery

ULXS4 Dimensions (H x W x D): 1.72 x 8.56 x 6.52 in. (43 x 214 x 163 mm)
ULXS4 Net Weight: 2 lbs, 5 oz. (1,049 g)

SM58 Vocal Microphone
Type: Dynamic (moving coil)
Frequency Response: 50 to 15,000 Hz
Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
Sensitivity (at 1,000 Hz Open Circuit Voltage):-54.5 dBV/Pa (1.85 mV) (1 Pa = 94 dB SPL)
Impedance: Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Connector: Three-pin professional audio connector (male XLR type)

WL185 Cardioid Lavalier Microphone
Type: Condenser (electret bias)
Frequency Response: 50 to 17,000 Hz
Output Impedance: 1800 ohms
Sensitivity (1 Pa = 94 dB SPL): -45.5 dBV/Pa
Maximum Sound Pressure Level: 130.5 dB SPL
Output Noise (A-weighted): 28.0 dB SPL
Dynamic Range: 102.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter.
Reviews
Questions & Answers View All
Loading....
Questions & Answers

© Woodwind & Brasswind. All rights reserved.     Terms & Conditions | Privacy Policy | Accessibility Statement

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.