dbx ZonePRO 641 m Speaker Processor
true
true
- Write a Review
The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ...Click To Read More About This Product
-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodJ07248&isStyle=true"
}
- SKU
- J07248000000000 J07248000000000
Earn up to 3,175 reward points.
6x4 digital zone processor.
The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.
- 6 Inputs / 4 Outputs
- 4 Balanced Mic/Line Inputs
- 2 Unbalanced, Mono-Summed RCA Input Pairs
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth per Output Zone
- Link Bus
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
Call or click to order today!
- Network Traffic, Power
- 6 Total (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs
- Euroblock (Line and Mic) RCA (Source)
- Electronically balanced/RF-filtered
- Euroblock: >50kÎ Balanced, >25kÎ Unbalanced, RF Filtered; RCA: >25kÎ Unbalanced, RF Filtered
- +20dBu Mic/Line, +12dBu RCA
- >40dB, typically >55dB @ 1 kHz
- 30 to 60dB
- < -118dBu, 22Hz-22kHz, 150Î Source Impedance
- +15VDC
- 4 total
- Euroblock
- Electronically Balanced, RF Filtered
- 120Î Balanced, 60Î Unbalanced
- +20dBu
- dbx Type IV conversion system
- (line) >113 dB, A-weighted, >110 dB unweighted
- >119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW
- >114 dB A-weighted, 110dB unweighted
- 48kHz
- 112 dB A-weighted, 109dB unweighted, 22kHz BW
- >109 dB A-weighted, >106 dB unweighted, 22kHz BW
- 0.003% typical at +4dBu, 1kHz, 0dB gain
- 20Hz - 20kHz, +/-0.5dB
- >80dB typical
- 0.6 msec
- 100VAC 50/60Hz, 120VAC 60Hz and 230VAC 50/60Hz
- 29 W
- <92.13
- 6.05 lbs / 2.74 kg
- 8.2 lbs / 4 kg
- 1.75" (1U) x 19" x 7.75" (45mm x 483mm x 197mm)
- UL 600065, IEC 60065, EN 55013, E60065
