Results 6361-6372 of 6,596
Applied Microphone Technology AMT VS Studio Violin Microphone with AP40 Preamp
The AMT VS Studio version combines the natural AMT VS Studio Clip-On microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level. The AMT VS Studio version is meant to be used either in a studio setting where close miking of an instrument is desired OR in a professional level setting where the sound engineer needs control of the microphone. Requires phantom power.
also ships to:
Astatic by CAD Small Format Omnidirectional Dynamic Handheld Microphone with Switch
Operating Principle: Moving Coil Dynamic<br />Polar Pattern: Omnidirectional<br />Frequency Response: 500Hz - 8KHz<br />Sensitivity: -49dBV (3.6mV) @ 1Pa<br />Impedance: 600 ohms<br />Cable: 6' extended, four-conductor, two-conductor shielded, coiled<br />Switch: DPDT momentary leaf<br />Case: Impact-resistant plastic<br />Net Weight: 4.9 oz.<br />Packaged Weight: 8.0 oz.<br />RF Immunity: Meets or exceeds EN55103-2, E1, E2, E3 and E4<br />RoHS Compliant.
also ships to: