-
{
"pageUrl":"MusiciansFriendApp://ProductDetailsPage",
"pageParams":"ID=site8prodL26699&isStyle=true"
}
- Product L26699
EarthQuaker Devices Gray Channel Dynamic Dirt Doubler Overdrive Effects Pedal and Octoskull T-Shirt Large Black
false
false
The EarthQuaker Devices Gray Channel is a real “twofer” of an overdrive. It is based around a classic hard-clipping gray box overdrive (subtle hint, ...Click To Read More About This Product
We're sorry-this item is unavailable.
Find a similar product below or contact our experts for a recommendation of great alternatives. Call us at 800.348.5003.
Customers Also Viewed:
Dress your tone in gray, and your torso in black, with this awesome package.
The EarthQuaker Devices Gray Channel is a real “twofer” of an overdrive. It is based around a classic hard-clipping gray box overdrive (subtle hint, huh), one of EarthQuaker's all-time favorites. Coincidentally, this is the very same pedal that got the founder of EarthQuaker started building pedals and launched EQD.
It is two channels of a simple hard clipping overdrive that leaves the character of the guitar and amp intact. The Gray Channel retains the classic warm overdrive sound and expands upon it with several clipping options and bigger bass response. Each channel has 3 clipping modes.
The Green channel- “Si” (Silicon clipping diodes), “Ge” (Germanium clipping diodes) and “N” (no clipping diodes). The “Si” mode will be bright/loud/fuzzy and has a natural tube type break up. “Ge” mode is a little looser with more lows and warmth and less output. “N” mode acts as a clean boost until you hit roughly 1 o’clock on the gain, at which point it’ll start to saturate the op amp into a biting, loud distortion. Phew! Still with them? Cool, onto the modes of the Red channel.
Here, you’ve got “LED” (LED clipping diodes), “FET” (Mosfet clipping diodes) and “N” (again, no clipping diodes). “LED” mode is the loudest, cleanest and most touch sensitive/least compressed. “Mos” mode is the most compressed with a tighter crunch; the biggest hesher of the group. And finally, the “N” mode is the same clean to crazy loud op amp distortion set-up as the Green channel. With a couple of switch clicks you can go from your bypassed tone to warm break up to over-the-top gnarly grind and any/every combination in between.
With more and more drive pedals moving onto already crowded pedal boards, having the Gray Channel dual overdrive is like, totally crucial for sonic growth and sustain. Join the fight to stop pedal board overcrowding, because before we can overdrive tomorrow, we must first drive today... or something.
Each Gray Channel is built one at a time, part by gorgeous part at a former automotive paint factory by a bunch of smokestacks on a dead end street in Akron, Ohio.
- Channel Switch: Selects between Red and Green channels
- Activate Switch: Turns the effect on and off
- Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise
- Green: Sets the output level when the green LED is lit.
- Toggle: “Si”- Silicon clipping, “N”- No clipping, “Ge”- Germanium Clipping
- Gain: Adjusts the drive, dirtier clockwise, cleaner counterclockwise
- Red: Sets the output level when the red LED is lit.
- Toggle: “LED- LED clipping, “N”- No clipping, “FET”- Mosfet Clipping
- Two channel hard-clipping overdrive
- Si (Silicon clipping diodes), Ge (Germanium clipping diodes) and N (No clipping diodes) modes for Green channel
- LED (LED clipping diodes), FET (Mosfet clipping diodes) and N (No clipping diodes) modes for Red channel
- Gain and level controls for each channel
- Handmade in USA
Call or click to order today!
- Power: Standard 9 volt DC power supply with a 2.1mm negative center barrel
- Current draw is 14 mA
- Dimensions: 4.65" x 3.65" x 2.25" with knobs
